- Low Supply Voltage Range:
3.6 V Down to 1.8 V - Ultralow Power Consumption
- Active Mode (AM):
All System Clocks Active
290 µA/MHz at 8 MHz, 3 V, Flash Program Execution (Typical)
150 µA/MHz at 8 MHz, 3 V, RAM Program Execution (Typical) - Standby Mode (LPM3):
Real-Time Clock With Crystal , Watchdog, and Supply Supervisor
Operational, Full RAM Retention, Fast Wake-Up:
1.9 µA at 2.2 V, 2.1 µA at 3 V (Typical)
Low-Power Oscillator (VLO), General Purpose Counter, Watchdog,
and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up:
1.4 µA at 3 V (Typical) - Off Mode (LPM4):
Full RAM Retention, Supply Supervisor Operational, Fast Wake-Up:
1.1 µA at 3 V (Typical) - Shutdown Mode (LPM4.5):
0.18 µA at 3 V (Typical)
- Wake-Up From Standby Mode in 3.5 µs (Typical)
- 16-Bit RISC Architecture, Extended Memory, Up to 25-MHz System Clock
- Flexible Power Management System
- Fully Integrated LDO With
Programmable Regulated Core Supply Voltage - Supply Voltage Supervision, Monitoring, and Brownout
- Unified Clock System
- FLL Control Loop for Frequency Stabilization
- Low-Power Low-Frequency Internal Clock Source (VLO)
- Low-Frequency Trimmed Internal Reference Source (REFO)
- 32-kHz Watch Crystals (XT1)
- High-Frequency Crystals Up to 32 MHz (XT2)
- 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
- 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
- 16-Bit Timer TA2, Timer_A With Three Capture/Compare Registers
- 16-Bit Timer TB0, Timer_B With Seven Capture/Compare Shadow Registers
- Two Universal Serial Communication Interfaces
- USCI_A0 and USCI_A1 Each Support:
- Enhanced UART Supports Auto-Baudrate Detection
- IrDA Encoder and Decoder
- Synchronous SPI
- USCI_B0 and USCI_B1 Each Support:
- Integrated 3.3-V Power System
- 12-Bit Analog-to-Digital (A/D) Converter With Internal Reference,
Sample-and-Hold, and Autoscan Feature - Comparator
- Hardware Multiplier Supporting 32-Bit Operations
- Serial Onboard Programming, No External Programming Voltage Needed
- Three Channel Internal DMA
- Basic Timer With Real-Time Clock Feature
- Family Members are Summarized in
- For Complete Module Descriptions, See the
MSP430x5xx and MSP430x6xx Family User’s Guide (SLAU208) - Controlled Baseline
- One Assembly and Test Site
- One Fabrication Site
- Wide operational temperature range of –40°C to +105°C
(some noted parameters specified for –40°C to +85°C only) - Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
All trademarks are the property of their respective owners.
- Low Supply Voltage Range:
3.6 V Down to 1.8 V - Ultralow Power Consumption
- Active Mode (AM):
All System Clocks Active
290 µA/MHz at 8 MHz, 3 V, Flash Program Execution (Typical)
150 µA/MHz at 8 MHz, 3 V, RAM Program Execution (Typical) - Standby Mode (LPM3):
Real-Time Clock With Crystal , Watchdog, and Supply Supervisor
Operational, Full RAM Retention, Fast Wake-Up:
1.9 µA at 2.2 V, 2.1 µA at 3 V (Typical)
Low-Power Oscillator (VLO), General Purpose Counter, Watchdog,
and Supply Supervisor Operational, Full RAM Retention, Fast Wake-Up:
1.4 µA at 3 V (Typical) - Off Mode (LPM4):
Full RAM Retention, Supply Supervisor Operational, Fast Wake-Up:
1.1 µA at 3 V (Typical) - Shutdown Mode (LPM4.5):
0.18 µA at 3 V (Typical)
- Wake-Up From Standby Mode in 3.5 µs (Typical)
- 16-Bit RISC Architecture, Extended Memory, Up to 25-MHz System Clock
- Flexible Power Management System
- Fully Integrated LDO With
Programmable Regulated Core Supply Voltage - Supply Voltage Supervision, Monitoring, and Brownout
- Unified Clock System
- FLL Control Loop for Frequency Stabilization
- Low-Power Low-Frequency Internal Clock Source (VLO)
- Low-Frequency Trimmed Internal Reference Source (REFO)
- 32-kHz Watch Crystals (XT1)
- High-Frequency Crystals Up to 32 MHz (XT2)
- 16-Bit Timer TA0, Timer_A With Five Capture/Compare Registers
- 16-Bit Timer TA1, Timer_A With Three Capture/Compare Registers
- 16-Bit Timer TA2, Timer_A With Three Capture/Compare Registers
- 16-Bit Timer TB0, Timer_B With Seven Capture/Compare Shadow Registers
- Two Universal Serial Communication Interfaces
- USCI_A0 and USCI_A1 Each Support:
- Enhanced UART Supports Auto-Baudrate Detection
- IrDA Encoder and Decoder
- Synchronous SPI
- USCI_B0 and USCI_B1 Each Support:
- Integrated 3.3-V Power System
- 12-Bit Analog-to-Digital (A/D) Converter With Internal Reference,
Sample-and-Hold, and Autoscan Feature - Comparator
- Hardware Multiplier Supporting 32-Bit Operations
- Serial Onboard Programming, No External Programming Voltage Needed
- Three Channel Internal DMA
- Basic Timer With Real-Time Clock Feature
- Family Members are Summarized in
- For Complete Module Descriptions, See the
MSP430x5xx and MSP430x6xx Family User’s Guide (SLAU208) - Controlled Baseline
- One Assembly and Test Site
- One Fabrication Site
- Wide operational temperature range of –40°C to +105°C
(some noted parameters specified for –40°C to +85°C only) - Extended Product Life Cycle
- Extended Product-Change Notification
- Product Traceability
All trademarks are the property of their respective owners.