0
LP8865C-Q1
  • LP8865C-Q1
  • LP8865C-Q1

LP8865C-Q1

ACTIVE

Automotive multitopology 65V, 2A backlight LED driver

Texas Instruments LP8865C-Q1 Product Info

1 April 2026 1

Parameters

Number of channels

1

Topology

Boost, Buck, Buck-Boost

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Vin (min) (V)

4.5

Vin (max) (V)

65

Vout (max) (V)

63

Iout (max) (A)

2

Iq (typ) (mA)

1

Switching frequency (max) (kHz)

400

Features

Cycle-by-cycle over-current protection, Integrated Switching FET, LED Open Detection, LED Short Detection, Thermal shutdown

Package

HVSSOP (DGN)-8-14.7 mm² 3 x 4.9

Features

  • AEC-Q100 Qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Integrated MOSFET for buck, buck-boost and boost topology
    • Wide input voltage: 4.5V to 65V
    • Integrated typical 2.8A and 300mΩ MOSFET
    • 400kHz fixed switching frequency
  • High precision power FET dimming
    • Analog dimming for U/V/W version
    • Fast PWM dimming for X/Y/Z version
  • Full protection features:
    • LED open and short protection
    • Cycle-by-cycle current limit
    • Switching FET failure protection
    • Thermal shutdown
  • AEC-Q100 Qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • Integrated MOSFET for buck, buck-boost and boost topology
    • Wide input voltage: 4.5V to 65V
    • Integrated typical 2.8A and 300mΩ MOSFET
    • 400kHz fixed switching frequency
  • High precision power FET dimming
    • Analog dimming for U/V/W version
    • Fast PWM dimming for X/Y/Z version
  • Full protection features:
    • LED open and short protection
    • Cycle-by-cycle current limit
    • Switching FET failure protection
    • Thermal shutdown

Description

The LP8865C-Q1 family is a low cost non-synchronous multi-topology solution with 4.5V to 65V wide input range. By integrating the low-side NMOS switch, the device is capable of driving LEDs with high power density and high efficiency. The family also supports common cathode connection and single layer PCB design. The switching frequency is fixed with 400kHz.

The LP8865C-Q1 family support PWM dimming by configuring through the DIM input pins by means of simple high and low signals or analog dimming by configuring through the DIM input pins by means of analog voltage signals. The device adopts an adaptive off-time current mode control along with smart and accurate sampling to enable fast PWM dimming and achieve high-dimming ratio.

The LP8865C-Q1 family also provides multiple systematic protections, including LED open and short, switching FET open and short, sense resistor open and short, and thermal shutdown.

The LP8865C-Q1 family is a low cost non-synchronous multi-topology solution with 4.5V to 65V wide input range. By integrating the low-side NMOS switch, the device is capable of driving LEDs with high power density and high efficiency. The family also supports common cathode connection and single layer PCB design. The switching frequency is fixed with 400kHz.

The LP8865C-Q1 family support PWM dimming by configuring through the DIM input pins by means of simple high and low signals or analog dimming by configuring through the DIM input pins by means of analog voltage signals. The device adopts an adaptive off-time current mode control along with smart and accurate sampling to enable fast PWM dimming and achieve high-dimming ratio.

The LP8865C-Q1 family also provides multiple systematic protections, including LED open and short, switching FET open and short, sense resistor open and short, and thermal shutdown.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request