0
LMV794
  • LMV794
  • LMV794
  • LMV794
  • LMV794

LMV794

ACTIVE

Dual, 88 MHz, Low Noise, 1.8V CMOS Input, Decompensated Operational Amplifiers

Texas Instruments LMV794 Product Info

1 April 2026 4

Parameters

Architecture

FET / CMOS Input, Voltage FB

Number of channels

2

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

1.8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5

GBW (typ) (MHz)

88

BW at Acl (MHz)

8.8

Acl, min spec gain (V/V)

10

Slew rate (typ) (V/µs)

28

Vn at flatband (typ) (nV√Hz)

5.8

Vn at 1 kHz (typ) (nV√Hz)

5.8

Iq per channel (typ) (mA)

1.3

Vos (offset voltage at 25°C) (max) (mV)

1.35

Rail-to-rail

In to V-, Out

Features

Decompensated

Rating

Catalog

Operating temperature range (°C)

-40 to 125

CMRR (typ) (dB)

100

Input bias current (max) (pA)

50

Offset drift (typ) (µV/°C)

1.8

Iout (typ) (mA)

21

Package

SOIC (D)-8-29.4 mm² 4.9 x 6

Features

    (Typical 5V Supply, Unless Otherwise Noted)

  • Input Referred Voltage Noise 5.8 nV/√Hz
  • Input Bias Current 100 fA
  • Gain Bandwidth Product 88 MHz
  • Supply Current per Channel
    • LMV793 1.15 mA
    • LMV794 1.30 mA
  • Rail-to-Rail Output Swing
    • @ 10 kΩ Load 25 mV from Rail
    • @ 2 kΩ Load 45 mV from Rail
  • Ensured 2.5V and 5.0V Performance
  • Total Harmonic Distortion 0.04% @1 kHz, 600Ω
  • Temperature Range −40°C to 125°C

All trademarks are the property of their respective owners.

    (Typical 5V Supply, Unless Otherwise Noted)

  • Input Referred Voltage Noise 5.8 nV/√Hz
  • Input Bias Current 100 fA
  • Gain Bandwidth Product 88 MHz
  • Supply Current per Channel
    • LMV793 1.15 mA
    • LMV794 1.30 mA
  • Rail-to-Rail Output Swing
    • @ 10 kΩ Load 25 mV from Rail
    • @ 2 kΩ Load 45 mV from Rail
  • Ensured 2.5V and 5.0V Performance
  • Total Harmonic Distortion 0.04% @1 kHz, 600Ω
  • Temperature Range −40°C to 125°C

All trademarks are the property of their respective owners.

Description

The LMV793 (single) and the LMV794 (dual) CMOS input operational amplifiers offer a low input voltage noise density of 5.8 nV/√Hz while consuming only 1.15 mA (LMV793) of quiescent current. The LMV793/LMV794 are stable at a gain of 10 and have a gain bandwidth product (GBW) of 88 MHz. The LMV793/LMV794 have a supply voltage range of 1.8V to 5.5V and can operate from a single supply. The LMV793/LMV794 each feature a rail-to-rail output stage capable of driving a 600Ω load and sourcing as much as 60 mA of current.

The LMV793/LMV794 provide optimal performance in low voltage and low noise systems. A CMOS input stage, with typical input bias currents in the range of a few femto-Amperes, and an input common mode voltage range, which includes ground, make the LMV793/LMV794 ideal for low power sensor applications where high speeds are needed.

The LMV793/LMV794 are manufactured using TI’s advanced VIP50 process. The LMV793 is offered in either a 5-Pin SOT23 or an 8-Pin SOIC package. The LMV794 is offered in either the 8-Pin SOIC or the 8-Pin VSSOP.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request