0
LM5152-Q1
  • LM5152-Q1
  • LM5152-Q1

LM5152-Q1

ACTIVE

Automotive 2.2 MHz wide VIN low IQ synchronous boost controller

Texas Instruments LM5152-Q1 Product Info

1 April 2026 3

Parameters

Rating

Automotive

Topology

Boost

Vin (max) (V)

42

Vin (min) (V)

3.8

Vout (max) (V)

20

Vout (min) (V)

5

Control mode

current mode

Features

Adjustable current limit, Bypass Mode, Enable, Frequency synchronization, Hiccup mode protection, Light Load Efficiency, Spread Spectrum, Synchronization, Synchronous Rectification, Tracking, UVLO adjustable

EMI features

Frequency Dithering, Spread Spectrum

Duty cycle (max) (%)

94

Iq (typ) (A)

0.000011

TI functional safety category

Functional Safety-Capable

Operating temperature range (°C)

-40 to 150

Package

VQFN (RGR)-20-12.25 mm² 3.5 x 3.5

Features

  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • Suited for wide operating range automotive battery powered applications
    • 3.8-V to 42-V input operating range
    • Dynamically programmable VOUT from 5 V to 20 V (protection up to 57 V)
    • Minimum boost input 0.8 V when BIAS ≥ 3.8 V
    • Bypass operation when VSUPPLY > VLOAD (LM5152 only, see the device comparison table)
  • Minimized battery drain
    • Shutdown current ≤ 3 µA
    • Automatic mode transition
    • Battery drain in deep sleep ≤ 11 µA (bypass operation, charge pump off)
    • Battery drain in deep sleep ≤ 33 µA (bypass operation, charge pump on)
    • BIAS IQ in sleep ≤ 13 µA (skip mode)
    • Strong 5-V MOSFET drivers
  • Small solution size and low cost
    • 2.2-MHz maximum switching frequency
    • Internal boot diode
    • Constant peak current limit over VIN
    • Supports DCR inductor current sensing
    • QFN-20 with wettable flanks
  • Avoid AM band interference and crosstalk
    • Optional clock synchronization
    • 100-kHz to 2.2-MHz switching frequency
    • Selectable switching mode (FPWM, diode emulation, skip mode)
  • EMI mitigation
    • Optional programmable spread spectrum
    • Lead-less package
  • Programmability and flexibility
    • Dynamic VOUT tracking
    • Dynamic switching frequency programming
    • Programmable line UVLO
    • Adjustable soft start
    • Adaptive dead time
    • Boost STATUS indicator
  • Integrated protection features
    • Cycle-by-cycle peak current limit
    • Overvoltage protection
    • HB-SW short protection
    • Thermal shutdown
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C to +125°C, TA
  • Functional Safety-Capable
  • Suited for wide operating range automotive battery powered applications
    • 3.8-V to 42-V input operating range
    • Dynamically programmable VOUT from 5 V to 20 V (protection up to 57 V)
    • Minimum boost input 0.8 V when BIAS ≥ 3.8 V
    • Bypass operation when VSUPPLY > VLOAD (LM5152 only, see the device comparison table)
  • Minimized battery drain
    • Shutdown current ≤ 3 µA
    • Automatic mode transition
    • Battery drain in deep sleep ≤ 11 µA (bypass operation, charge pump off)
    • Battery drain in deep sleep ≤ 33 µA (bypass operation, charge pump on)
    • BIAS IQ in sleep ≤ 13 µA (skip mode)
    • Strong 5-V MOSFET drivers
  • Small solution size and low cost
    • 2.2-MHz maximum switching frequency
    • Internal boot diode
    • Constant peak current limit over VIN
    • Supports DCR inductor current sensing
    • QFN-20 with wettable flanks
  • Avoid AM band interference and crosstalk
    • Optional clock synchronization
    • 100-kHz to 2.2-MHz switching frequency
    • Selectable switching mode (FPWM, diode emulation, skip mode)
  • EMI mitigation
    • Optional programmable spread spectrum
    • Lead-less package
  • Programmability and flexibility
    • Dynamic VOUT tracking
    • Dynamic switching frequency programming
    • Programmable line UVLO
    • Adjustable soft start
    • Adaptive dead time
    • Boost STATUS indicator
  • Integrated protection features
    • Cycle-by-cycle peak current limit
    • Overvoltage protection
    • HB-SW short protection
    • Thermal shutdown

Description

The LM5152x-Q1 (LM5152-Q1 and LM51521-Q1) device is a wide input range synchronous boost controller that employs peak current mode control.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request