0
LM211-Q1
  • LM211-Q1

LM211-Q1

ACTIVE

Automotive Catalog Differential Comparator With Strobes

Texas Instruments LM211-Q1 Product Info

1 April 2026 0

Parameters

Number of channels

1

Output type

Open-collector, Open-drain

Propagation delay time (µs)

0.115

Vs (max) (V)

30

Vs (min) (V)

3.5

Rating

Automotive

Features

Strobe, Vos Adj Pin

Iq per channel (typ) (mA)

5.1

Vos (offset voltage at 25°C) (max) (mV)

3

Rail-to-rail

No

Operating temperature range (°C)

-40 to 125

Input bias current (±) (max) (nA)

100

VICR (max) (V)

28

VICR (min) (V)

0.5

Package

SOIC (D)-8-29.4 mm² 4.9 x 6

Features

  • Qualified for Automotive Applications
  • Fast Response Times
  • Strobe Capability
  • Maximum Input Bias Current . . . 150 nA
  • Maximum Input Offset Current . . . 20 nA
  • Can Operate From Single 5-V Supply
  • Qualified for Automotive Applications
  • Fast Response Times
  • Strobe Capability
  • Maximum Input Bias Current . . . 150 nA
  • Maximum Input Offset Current . . . 20 nA
  • Can Operate From Single 5-V Supply

Description

The LM211 is a single high-speed voltage comparator. This device is designed to operate from a wide range of power-supply voltages, including ±15-V supplies for operational amplifiers and 5-V supplies for logic systems. The output levels are compatible with most TTL and MOS circuits. This comparator is capable of driving lamps or relays and switching voltages up to 50 V at 50 mA. All inputs and outputs can be isolated from system ground. The outputs can drive loads referenced to ground, VCC+, or VCC-. Offset balancing and strobe capabilities are available, and the outputs can be wire-OR connected. If the strobe is low, the output is in the off state, regardless of the differential input.

The LM211 is a single high-speed voltage comparator. This device is designed to operate from a wide range of power-supply voltages, including ±15-V supplies for operational amplifiers and 5-V supplies for logic systems. The output levels are compatible with most TTL and MOS circuits. This comparator is capable of driving lamps or relays and switching voltages up to 50 V at 50 mA. All inputs and outputs can be isolated from system ground. The outputs can drive loads referenced to ground, VCC+, or VCC-. Offset balancing and strobe capabilities are available, and the outputs can be wire-OR connected. If the strobe is low, the output is in the off state, regardless of the differential input.