0
LM140K
  • LM140K

LM140K

ACTIVE

1A Fixed Output Linear Regulator / LDO

Texas Instruments LM140K Product Info

1 April 2026 5

Parameters

Rating

Military

Vin (max) (V)

35

Vin (min) (V)

17.6

Iout (max) (A)

1

Output options

Fixed Output

Vout (max) (V)

15

Vout (min) (V)

5

Fixed output options (V)

5, 12, 15

Noise (µVrms)

40

PSRR at 100 KHz (dB)

50

Iq (typ) (mA)

7

Thermal resistance θJA (°C/W)

39

Load capacitance (min) (µF)

0

Regulated outputs (#)

1

Accuracy (%)

4

Dropout voltage (Vdo) (typ) (mV)

2500

Operating temperature range (°C)

-55 to 125

Package

TO-CAN (NDS)-2-969.2166 mm² 38.94 x 24.89

Features

  • Complete Specifications at 1A Load
  • Output Voltage Tolerances of ±4% at Tj = 25°C
  • Internal Thermal Overload Protection
  • Internal Short-circuit Current Limit
  • Output Transistor Safe Area Protection
  • P+ Product Enhancement Tested

All trademarks are the property of their respective owners.

  • Complete Specifications at 1A Load
  • Output Voltage Tolerances of ±4% at Tj = 25°C
  • Internal Thermal Overload Protection
  • Internal Short-circuit Current Limit
  • Output Transistor Safe Area Protection
  • P+ Product Enhancement Tested

All trademarks are the property of their respective owners.

Description

The LM140K monolithic 3-terminal positive voltage regulator employs internal current-limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 1.0A output current. They are intended as fixed voltage regulators in a wide range of applications including local (on-card) regulation for elimination of noise and distribution problems associated with single-point regulation. In addition to use as fixed voltage regulators, these devices can be used with external components to obtain adjustable output voltages and currents.

Considerable effort was expended to make the entire series of regulators easy to use and minimize the number of external components. It is not necessary to bypass the output, although this does improve transient response. Input bypassing is needed only if the regulator is located far from the filter capacitor of the power supply.

The LM140K is available in 5V, 12V and 15V options in the steel TO-3 power package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request