0
INA827
  • INA827

INA827

ACTIVE

Precision, G>5, 200uA, 2.7-V to 36-V Supply Instrumentation Amplifier

Texas Instruments INA827 Product Info

1 April 2026 4

Parameters

Number of channels

1

Vs (max) (V)

36

Vs (min) (V)

3

Input offset (±) (max) (µV)

150

Voltage gain (min) (V/V)

5

Voltage gain (max) (V/V)

1000

Noise at 1 kHz (typ) (nV√Hz)

17

Features

Cost Optimized

CMRR (min) (dB)

110

Input offset drift (±) (max) (µV/°C)

2.5

Input bias current (±) (max) (nA)

50

Iq (typ) (mA)

0.2

Bandwidth at min gain (typ) (MHz)

0.6

Gain error (±) (max) (%)

0.4

Operating temperature range (°C)

-40 to 125

Rating

Catalog

Type

Resistor

Gain nonlinearity (±) (max) (%)

0.005

Output swing headroom (to negative supply) (typ) (V)

0.1

Output swing headroom (to positive supply) (typ) (V)

-0.15

Input common mode headroom (to negative supply) (typ) (V)

-0.2

Input common mode headroom (to positive supply) (typ) (V)

-0.9

Noise at 0.1 Hz to 10 Hz (typ) (µVPP)

0.5

Package

VSSOP (DGK)-8-14.7 mm² 3 x 4.9

Features

  • Eliminates Errors from External Resistors at Gain of 5
  • Common-Mode Range Goes Below
    Negative Supply
  • Input Protection: Up to ±40 V
  • Rail-to-Rail Output
  • Outstanding Precision:
    • Common-Mode Rejection: 88 dB, minimum
    • Low Offset Voltage: 150 µV, maximum
    • Low Drift: 2.5 µV/°C, maximum
    • Low Gain Drift: 1 ppm/°C, max (G = 5 V/V)
    • Power-Supply Rejection:
      100 dB, min (G = 5)
    • Noise: 17 nV/√Hz, G = 1000 V/V
  • High Bandwidth:
    • G = 5: 600 kHz
    • G = 100: 150 kHz
  • Supply Current: 200 µA, typical
  • Supply Range:
    • Single Supply: 3 V to 36 V
    • Dual Supply: ±1.5 V to ±18 V
  • Specified Temperature Range:
    –40°C to +125°C
  • Package: 8-pin VSSOP
  • Eliminates Errors from External Resistors at Gain of 5
  • Common-Mode Range Goes Below
    Negative Supply
  • Input Protection: Up to ±40 V
  • Rail-to-Rail Output
  • Outstanding Precision:
    • Common-Mode Rejection: 88 dB, minimum
    • Low Offset Voltage: 150 µV, maximum
    • Low Drift: 2.5 µV/°C, maximum
    • Low Gain Drift: 1 ppm/°C, max (G = 5 V/V)
    • Power-Supply Rejection:
      100 dB, min (G = 5)
    • Noise: 17 nV/√Hz, G = 1000 V/V
  • High Bandwidth:
    • G = 5: 600 kHz
    • G = 100: 150 kHz
  • Supply Current: 200 µA, typical
  • Supply Range:
    • Single Supply: 3 V to 36 V
    • Dual Supply: ±1.5 V to ±18 V
  • Specified Temperature Range:
    –40°C to +125°C
  • Package: 8-pin VSSOP

Description

The INA827 is a low-cost instrumentation amplifier (INA) that offers extremely low power consumption and operates over a very wide single- or dual-supply range. The device is optimized for the lowest possible gain drift of only 1 ppm per degree Celsius in G = 5, which requires no external resistor. However, a single external resistor sets any gain from 5 to 1000.

The INA827 is optimized to provide excellent common-mode rejection ratio (CMRR) of over 88 dB (G = 5) over frequencies up to 5 kHz. In G = 5, CMRR exceeds 88 dB across the full input common-mode range from the negative supply all the way up to 1 V of the positive supply. Using a rail-to-rail output, the INA827 is well-suited for low-voltage operation from a 3-V singlesupply as well as dual supplies up to ±18 V. Additional circuitry protects the inputs against overvoltage of up to ±40 V beyond the power supplies by limiting the input currents to a save level.

The INA827 is available in a small VSSOP-8 package and is specified for the –40°C to +125°C temperature range. For a similar instrumentation amplifier with a gain range of 1 V/V to 1000 V/V, see the INA826.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request