0
INA333-Q1
  • INA333-Q1
  • INA333-Q1

INA333-Q1

ACTIVE

Automotive low-power, zero-drift, precision instrumentation amplifier

Texas Instruments INA333-Q1 Product Info

1 April 2026 0

Parameters

Number of channels

1

Vs (max) (V)

5.5

Vs (min) (V)

1.8

Input offset (±) (max) (µV)

25

Voltage gain (min) (V/V)

1

Voltage gain (max) (V/V)

1000

Noise at 1 kHz (typ) (nV√Hz)

50

Features

Low power, Zero Drift

CMRR (min) (dB)

96

Input offset drift (±) (max) (µV/°C)

0.1

Input bias current (±) (max) (nA)

0.28

Iq (typ) (mA)

0.05

Bandwidth at min gain (typ) (MHz)

0.15

Gain error (±) (max) (%)

0.25

Operating temperature range (°C)

-40 to 125

TI functional safety category

Functional Safety-Capable

Rating

Automotive

Type

Resistor

Gain nonlinearity (±) (max) (%)

0.001

Output swing headroom (to negative supply) (typ) (V)

0.05

Output swing headroom (to positive supply) (typ) (V)

-0.05

Input common mode headroom (to negative supply) (typ) (V)

0.1

Input common mode headroom (to positive supply) (typ) (V)

-0.1

Noise at 0.1 Hz to 10 Hz (typ) (µVPP)

1

Package

VSSOP (DGK)-8-14.7 mm² 3 x 4.9

Features

  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C ≤ T A ≤ +125°C
  • Functional Safety-Capable
  • Low offset voltage: 25 µV (maximum), G ≥ 100
  • Low drift: 0.1 µV/°C, G ≥ 100
  • Low noise: 50 nV/√ Hz, G ≥ 100
  • High CMRR: 96 dB (minimum), G ≥ 10
  • Low input bias current: 280 pA (maximum)
  • Supply range: 1.8 V to 5.5 V
  • Input voltage: (V–) + 0.1 V to (V+) – 0.1 V
  • Output range: (V–) + 0.05 V to (V+) – 0.05 V
  • Low quiescent current: 50 µA
  • Operating temperature: –40°C to +125°C
  • RFI filtered inputs
  • Package: 8-pin VSSOP
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C ≤ T A ≤ +125°C
  • Functional Safety-Capable
  • Low offset voltage: 25 µV (maximum), G ≥ 100
  • Low drift: 0.1 µV/°C, G ≥ 100
  • Low noise: 50 nV/√ Hz, G ≥ 100
  • High CMRR: 96 dB (minimum), G ≥ 10
  • Low input bias current: 280 pA (maximum)
  • Supply range: 1.8 V to 5.5 V
  • Input voltage: (V–) + 0.1 V to (V+) – 0.1 V
  • Output range: (V–) + 0.05 V to (V+) – 0.05 V
  • Low quiescent current: 50 µA
  • Operating temperature: –40°C to +125°C
  • RFI filtered inputs
  • Package: 8-pin VSSOP

Description

The INA333-Q1 is a low-power, precision instrumentation amplifier offering excellent accuracy. The three-op-amp design, small size, and low power make this device an excellent choice for automotive applications that require precise measurements, such as current leakage detection. This INA333-Q1 is also a great choice for applications that use resistive bridge sensors.

A single external resistor sets any gain from 1 to 1000. The INA333-Q1 is designed to use an industry-standard gain equation: G = 1 + (100 kΩ / R G).

The INA333-Q1 provides very low offset voltage (25 µV, G ≥ 100), excellent offset voltage drift (0.1 µV/°C, G ≥ 100), and high common-mode rejection (96 dB at G ≥ 10). The device operates with power supplies as low as 1.8 V (±0.9 V), and quiescent current is only 50 µA. Auto-calibration techniques maintain excellent precision over the automotive temperature range. The INA333-Q1 provides a very low peak-to-peak noise of 1 µV.

The INA333-Q1 device is available in an 8-pin VSSOP package and is specified over the T A = –40°C to +125°C temperature range.

The INA333-Q1 is a low-power, precision instrumentation amplifier offering excellent accuracy. The three-op-amp design, small size, and low power make this device an excellent choice for automotive applications that require precise measurements, such as current leakage detection. This INA333-Q1 is also a great choice for applications that use resistive bridge sensors.

A single external resistor sets any gain from 1 to 1000. The INA333-Q1 is designed to use an industry-standard gain equation: G = 1 + (100 kΩ / R G).

The INA333-Q1 provides very low offset voltage (25 µV, G ≥ 100), excellent offset voltage drift (0.1 µV/°C, G ≥ 100), and high common-mode rejection (96 dB at G ≥ 10). The device operates with power supplies as low as 1.8 V (±0.9 V), and quiescent current is only 50 µA. Auto-calibration techniques maintain excellent precision over the automotive temperature range. The INA333-Q1 provides a very low peak-to-peak noise of 1 µV.

The INA333-Q1 device is available in an 8-pin VSSOP package and is specified over the T A = –40°C to +125°C temperature range.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request