Texas Instruments DS34C86T Product Info

Parameters

Number of receivers	4
Number of transmitters	0
Duplex	Half
Supply voltage (nom) (V)	5
Signaling rate (max) (Mbps)	30
IEC 61000-4-2 contact (±V)	None
Fault protection (V)	-14 to 14
Common-mode range (V)	-14 to 14
Number of nodes	32
Isolated	No
Supply current (max) (µA)	23000
Rating	Catalog
Operating temperature range (°C)	-40 to 85

Package

SOIC (D)-16-59.4 mm² 9.9 x 6

Features

CMOS Design for Low Power
±0.2V Sensitivity Over the Input Common Mode Voltage Range
Typical Propagation Delays: 19 ns
Typical Input Hysteresis: 60 mV
Inputs Won't Load Line when V_CC = 0V
Meets the Requirements of EIA Standard RS-422
TRI-STATE Outputs for System Bus Compatibility
Available in Surface Mount
Open Input Failsafe Feature, Output High for Open Input

All trademarks are the property of their respective owners.

CMOS Design for Low Power
±0.2V Sensitivity Over the Input Common Mode Voltage Range
Typical Propagation Delays: 19 ns
Typical Input Hysteresis: 60 mV
Inputs Won't Load Line when V_CC = 0V
Meets the Requirements of EIA Standard RS-422
TRI-STATE Outputs for System Bus Compatibility
Available in Surface Mount
Open Input Failsafe Feature, Output High for Open Input

All trademarks are the property of their respective owners.

Description

The DS34C86T is a quad differential line receiver designed to meet the RS-422, RS-423, and Federal Standards 1020 and 1030 for balanced and unbalanced digital data transmission, while retaining the low power characteristics of CMOS.

The DS34C86T has an input sensitivity of 200 mV over the common mode input voltage range of ±7V. Hysteresis is provided to improve noise margin and discourage output instability for slowly changing input waveforms.

The DS34C86T features internal pull-up and pull-down resistors which prevent output oscillation on unused channels.

Separate enable pins allow independent control of receiver pairs. The TRI-STATE outputs have 6 mA source and sink capability. The DS34C86T is pin compatible with the DS3486.

The DS34C86T is a quad differential line receiver designed to meet the RS-422, RS-423, and Federal Standards 1020 and 1030 for balanced and unbalanced digital data transmission, while retaining the low power characteristics of CMOS.

The DS34C86T has an input sensitivity of 200 mV over the common mode input voltage range of ±7V. Hysteresis is provided to improve noise margin and discourage output instability for slowly changing input waveforms.

The DS34C86T features internal pull-up and pull-down resistors which prevent output oscillation on unused channels.

Separate enable pins allow independent control of receiver pairs. The TRI-STATE outputs have 6 mA source and sink capability. The DS34C86T is pin compatible with the DS3486.

ELECTRONIC COMPONENTS
All In One Distributor

DS34C86T

Quad CMOS Differential Line Receiver

Texas Instruments DS34C86T Product Info

Parameters

Package

Features

Description

SUBMITTED SUCCESSFULLY！

ELECTRONIC COMPONENTS All In One Distributor

DS34C86T

Quad CMOS Differential Line Receiver

Texas Instruments DS34C86T Product Info

Parameters

Package

Features

Description

SUBMITTED SUCCESSFULLY！

ELECTRONIC COMPONENTS
All In One Distributor