0
CC3135
  • CC3135
  • CC3135

CC3135

ACTIVE

SimpleLink™ 32-bit Arm Cortex-M3 dual-band Wi-Fi® wireless network processor

Texas Instruments CC3135 Product Info

1 April 2026 3

Parameters

Processor

External MCU

Type

Wireless network processor

Technology

Wi-Fi

Protocols

Wi-Fi 2.4 GHz, Wi-Fi 5 GHz

Operating system

FreeRTOS, TI RTOS

Certifications

Wi-Fi CERTIFIED Chip

Throughput UDP (max) (Mbps)

16

Features

16 secure sockets, 2.4-GHz coexistence, 4 STAs, 802.11abgn, IPv4 & IPv6

Security

Device attestation & anti-counterfeit, FIPS 140-2 Level 1, Secure communication, Secure firmware & software update, Secure storage

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Package

VQFN (RGK)-64-81 mm² 9 x 9

Features

  • Integrated dual-band Wi-Fi and internet protocols
  • 802.11a/b/g/n: 2.4GHz and 5GHz
  • FIPS 140-2 Level 1 certification
  • Rich set of IoT security features helps developers protect data
  • Low-power modes for battery powered application
  • Coexistence with 2.4GHz radios
  • Industrial temperature: –40°C to +85°C
  • Transferable Wi-Fi Alliance certification
  • Wi-Fi network processor subsystem:
    • Wi-Fi core:
      • 802.11a/b/g/n 2.4GHz and 5GHz
      • Modes:
        • Access point (AP)
        • Station (STA)
        • Wi-Fi Direct (only supported on 2.4GHz)
      • Security:
        • WEP
        • WPA™/ WPA2™ PSK
        • WPA2 Enterprise
        • WPA3™ Personal
        • WPA3™ Enterprise
    • Internet and application protocols:
      • HTTPs server, mDNS, DNS-SD, DHCP
      • IPv4 and IPv6 TCP/IP stack
      • 16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)
    • Built-in power management subsystem:
      • Configurable low-power profiles (always, intermittent, tag)
      • Advanced low-power modes
      • Integrated DC/DC regulators
  • Multilayered security features:
    • Separate execution environments
    • Networking security
    • Device identity and key
    • Hardware accelerator cryptographic engines (AES, DES, SHA/MD5, CRC)
    • Application-level security (encryption, authentication, access control)
    • Initial secure programming
    • Software tamper detection
    • Secure boot
    • Certificate signing request (CSR)
    • Unique per device key pair
  • Application throughput:
    • UDP: 16Mbps, TCP: 13Mbps
    • Peak: 72Mbps
  • Power-management subsystem
    • Integrated DC/DC converters support a wide range of supply voltage:
      • VBAT wide-voltage mode: 2.1V to 3.6V
      • VIO is always tied with VBAT
    • Advanced low-power modes:
      • Shutdown: 1µA, hibernate: 4µA
      • Low-power deep sleep (LPDS): 120µA
      • Idle connected (MCU in LPDS): 710µA
      • RX traffic (MCU active): 53mA
      • TX traffic (MCU active): 223mA
  • Wi-Fi TX power:
    • 2.4GHz: 18.0dBm at 1 DSSS
    • 5GHz: 18.1dBm at 6 OFDM
  • Wi-Fi RX sensitivity:
    • 2.4GHz: –96dBm at 1 DSSS
    • 5GHz: –92dBm at 6 OFDM
  • Clock source:
    • 40.0MHz crystal with internal oscillator
    • 32.768kHz crystal or external RTC
  • RGK package
    • 64-pin, 9mm × 9mm very thin quad flat nonleaded (VQFN) package, 0.5mm pitch
  • Device supports SimpleLink™ MCU Platform developer’s ecosystem
  • Integrated dual-band Wi-Fi and internet protocols
  • 802.11a/b/g/n: 2.4GHz and 5GHz
  • FIPS 140-2 Level 1 certification
  • Rich set of IoT security features helps developers protect data
  • Low-power modes for battery powered application
  • Coexistence with 2.4GHz radios
  • Industrial temperature: –40°C to +85°C
  • Transferable Wi-Fi Alliance certification
  • Wi-Fi network processor subsystem:
    • Wi-Fi core:
      • 802.11a/b/g/n 2.4GHz and 5GHz
      • Modes:
        • Access point (AP)
        • Station (STA)
        • Wi-Fi Direct (only supported on 2.4GHz)
      • Security:
        • WEP
        • WPA™/ WPA2™ PSK
        • WPA2 Enterprise
        • WPA3™ Personal
        • WPA3™ Enterprise
    • Internet and application protocols:
      • HTTPs server, mDNS, DNS-SD, DHCP
      • IPv4 and IPv6 TCP/IP stack
      • 16 BSD sockets (fully secured TLS v1.2 and SSL 3.0)
    • Built-in power management subsystem:
      • Configurable low-power profiles (always, intermittent, tag)
      • Advanced low-power modes
      • Integrated DC/DC regulators
  • Multilayered security features:
    • Separate execution environments
    • Networking security
    • Device identity and key
    • Hardware accelerator cryptographic engines (AES, DES, SHA/MD5, CRC)
    • Application-level security (encryption, authentication, access control)
    • Initial secure programming
    • Software tamper detection
    • Secure boot
    • Certificate signing request (CSR)
    • Unique per device key pair
  • Application throughput:
    • UDP: 16Mbps, TCP: 13Mbps
    • Peak: 72Mbps
  • Power-management subsystem
    • Integrated DC/DC converters support a wide range of supply voltage:
      • VBAT wide-voltage mode: 2.1V to 3.6V
      • VIO is always tied with VBAT
    • Advanced low-power modes:
      • Shutdown: 1µA, hibernate: 4µA
      • Low-power deep sleep (LPDS): 120µA
      • Idle connected (MCU in LPDS): 710µA
      • RX traffic (MCU active): 53mA
      • TX traffic (MCU active): 223mA
  • Wi-Fi TX power:
    • 2.4GHz: 18.0dBm at 1 DSSS
    • 5GHz: 18.1dBm at 6 OFDM
  • Wi-Fi RX sensitivity:
    • 2.4GHz: –96dBm at 1 DSSS
    • 5GHz: –92dBm at 6 OFDM
  • Clock source:
    • 40.0MHz crystal with internal oscillator
    • 32.768kHz crystal or external RTC
  • RGK package
    • 64-pin, 9mm × 9mm very thin quad flat nonleaded (VQFN) package, 0.5mm pitch
  • Device supports SimpleLink™ MCU Platform developer’s ecosystem

Description

Connect any microcontroller (MCU) to the Internet of Things (IoT) with the CC3135 device, a dual-band wireless network processor from Texas Instruments. The CC3135 Wi-Fi® Internet-on-a chip™ device contains an Arm Cortex-M3 MCU dedicated to Wi-Fi® and internet protocols, to offload networking activities from the host MCU. The subsystem includes a dual-band 802.11a/b/g/n radio, baseband, and MAC with a powerful crypto engine for fast, secure Internet connections with 256-bit encryption and a built-in power management for best-in-class low-power performance.

The Wi-Fi CERTIFIED® CC3135 device dramatically simplifies the implementation of low-power, with the integrated Wi-Fi Alliance® IoT low power feature.

This generation introduces new capabilities that further simplify the connectivity of things to the Internet. The main new features include:

  • 802.11a (5GHz) support
  • BLE/2.4GHz radio coexistence
  • Antenna selection
  • Enhanced security with FIPS 140-2 Level 1 certification and more. For exact status of FIPS certification for a specific part number, refer to https://csrc.nist.gov/publications/fips.
  • Up to 16 concurrent secure sockets
  • Certificate sign request (CSR)
  • Online certificate status protocol (OCSP)
  • Wi-Fi Alliance® certified for IoT applications with low-power capabilities and more
  • Hostless mode for offloading template packet transmissions
  • Improved fast scan

The CC3135 device is delivered with a slim and user-friendly host driver to simplify the integration and development of networking applications. The host driver can easily be ported to most platforms and operating systems (OS). The driver has a small memory footprint and can run on 8-bit, 16-bit, or 32-bit microcontrollers with any clock speed (no performance or real-time dependency).

The CC3135 device is part of the SimpleLink™ MCU platform, a common, easy-to-use development environment based on a single core software development kit (SDK), rich tool set, reference designs, and E2E™ community which supports Wi-Fi®, Bluetooth® low energy, Sub-1GHz and host MCUs. For more information, visit www.ti.com/simplelink.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request