0
CC1311R3
  • CC1311R3
  • CC1311R3
  • CC1311R3

CC1311R3

ACTIVE

SimpleLink™ Arm® Cortex®-M4 Sub-1 GHz wireless MCU with 352-kB flash

Texas Instruments CC1311R3 Product Info

1 April 2026 4

Parameters

Protocols

6LoWPAN, MIOTY, Proprietary, TI 15.4, Wireless M-Bus

Modulation scheme

(G)MSK, 2(G)FSK, 4(G)FSK, ASK, OOK

Frequency bands

1076-1315, 143-176, 287-351, 359-527, 861-1054

Type

Wireless MCU

TX power (max) (dBm)

14

RAM (kByte)

40

Flash memory (kByte)

352

CPU

Arm® Cortex®-M4

Operating system

FreeRTOS, RTOS, TI-RTOS

Peripherals

1 SPI, 1 UART, 1 comparator, 12-bit ADC 8-channel, 4 timers, 8-bit DAC, I2C, I2S

Number of GPIOs

30

RX current (lowest) (mA)

5.4

Rating

Catalog

Operating temperature range (°C)

-40 to 105

Edge AI enabled

No

Package

VQFN (RGZ)-48-49 mm² 7 x 7

Features

Wireless microcontroller

  • Powerful 48MHz Arm Cortex-M4 processor
  • 352KB flash program memory
  • 32KB of ultra-low leakage SRAM
  • 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, OOK, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Low power consumption

  • MCU consumption:
    • 2.63mA active mode, CoreMark
    • 55µA/MHz running CoreMark
    • 0.7µA standby mode, RTC, 32KB RAM
    • 0.1µA shutdown mode, wake-up on pin
  • Radio Consumption:
    • 5.4mA RX at 868MHz
    • 24.9mA TX at +14dBm at 868MHz

Wireless protocol support

High-performance radio

  • -121dBm for 2.5kbps long-range mode
  • -120dBm at 4.8kbps narrowband mode, 433MHz
  • -118dBm at 9.6kbps narrowband mode, 868MHz
  • -110dBm at 50kbps, 802.15.4, 868MHz
  • Output power up to +14dBm with temperature compensation
  • Down to 4kHz receiver filter bandwidth

Regulatory compliance

  • Designed for systems targeting compliance with these standards:
    • ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 303 131, EN 303 204
    • FCC CFR47 Part 15
    • ARIB STD-T108

MCU peripherals

  • Digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit ADC, 200 kSamples/s, 8 channels
  • 8-bit DAC
  • Analog Comparator
  • UART, SSI, I2C, I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • AES 128-bit cryptographic accelerator
  • True random number generator (TRNG)
  • Additional cryptography drivers available in Software Development Kit (SDK)

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8V to 3.8V single supply voltage
  • -40 to +105°C

Package

  • 7mm × 7mm RGZ VQFN48 (30 GPIOs)
  • 5mm × 5mm RKP VQFN40 (22 GPIOs)
  • RoHS-compliant package

Wireless microcontroller

  • Powerful 48MHz Arm Cortex-M4 processor
  • 352KB flash program memory
  • 32KB of ultra-low leakage SRAM
  • 8KB of Cache SRAM (Alternatively available as general-purpose RAM)
  • Programmable radio includes support for 2-(G)FSK, 4-(G)FSK, MSK, OOK, IEEE 802.15.4 PHY and MAC
  • Supports over-the-air upgrade (OTA)

Low power consumption

  • MCU consumption:
    • 2.63mA active mode, CoreMark
    • 55µA/MHz running CoreMark
    • 0.7µA standby mode, RTC, 32KB RAM
    • 0.1µA shutdown mode, wake-up on pin
  • Radio Consumption:
    • 5.4mA RX at 868MHz
    • 24.9mA TX at +14dBm at 868MHz

Wireless protocol support

High-performance radio

  • -121dBm for 2.5kbps long-range mode
  • -120dBm at 4.8kbps narrowband mode, 433MHz
  • -118dBm at 9.6kbps narrowband mode, 868MHz
  • -110dBm at 50kbps, 802.15.4, 868MHz
  • Output power up to +14dBm with temperature compensation
  • Down to 4kHz receiver filter bandwidth

Regulatory compliance

  • Designed for systems targeting compliance with these standards:
    • ETSI EN 300 220 Receiver Cat. 1.5 and 2, EN 303 131, EN 303 204
    • FCC CFR47 Part 15
    • ARIB STD-T108

MCU peripherals

  • Digital peripherals can be routed to any GPIO
  • Four 32-bit or eight 16-bit general-purpose timers
  • 12-bit ADC, 200 kSamples/s, 8 channels
  • 8-bit DAC
  • Analog Comparator
  • UART, SSI, I2C, I2S
  • Real-time clock (RTC)
  • Integrated temperature and battery monitor

Security enablers

  • AES 128-bit cryptographic accelerator
  • True random number generator (TRNG)
  • Additional cryptography drivers available in Software Development Kit (SDK)

Development tools and software

Operating range

  • On-chip buck DC/DC converter
  • 1.8V to 3.8V single supply voltage
  • -40 to +105°C

Package

  • 7mm × 7mm RGZ VQFN48 (30 GPIOs)
  • 5mm × 5mm RKP VQFN40 (22 GPIOs)
  • RoHS-compliant package

Description

The SimpleLink™CC1311R3 device is a multiprotocol Sub-1GHz wireless microcontroller (MCU) supporting IEEE 802.15.4g, IPv6-enabled smart objects (6LoWPAN), mioty, proprietary systems, including the TI 15.4-Stack (Sub-1GHz). The CC1311R3 is based on an Arm® Cortex® M4 main processor and optimized for low-power wireless communication and advanced sensing in grid infrastructure, building automation, retail automation, personal electronics, and medical applications.

The CC1311R3 has a software-defined radio powered by an Arm® Cortex® M0, which allows support for multiple physical layers and RF standards. The device supports operation in 143MHz to 176MHz, 287MHz to 351MHz, 359MHz to 527MHz, 861MHz to 1054MHz, and 1076MHz to 1315MHz frequency bands. The CC1311R3 has an efficient built-in PA that supports +14dBm TX at 24.9mA current consumption. In RX, it has -121dBm sensitivity and 88dB blocking ±10MHz in SimpleLink™ long-range mode with 2.5kbps data rate.

The CC1311R3 has a low sleep current of 0.7µA with RTC and 32KB RAM retention.

Consistent with many customers’ 10 to 15 years or longer life cycle requirements, TI has a product life cycle policy with a commitment to product longevity and continuity of supply.

The CC1311R3 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Wi-SUN®, Amazon Sidewalk, mioty, Sub-1GHz MCUs, and host MCUs. CC1311R3 is part of a scalable portfolio with flash sizes from 32KB to 704KB with pin-to-pin compatible package options. The common SimpleLink™CC13xx and CC26xx Software Development Kit (SDK) and SysConfig system configuration tool support migration between devices in the portfolio. A comprehensive number of software stacks, application examples, and SimpleLink™ Academy training sessions are included in the SDK. For more information, visit wireless connectivity.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request