0
BQ79735-Q1
  • BQ79735-Q1
  • BQ79735-Q1

BQ79735-Q1

ACTIVE

Automotive high-voltage battery pack monitor with voltage and insulation-resistance sensing

Texas Instruments BQ79735-Q1 Product Info

1 April 2026 4

Parameters

Rating

Automotive

Operating temperature range (°C)

-40 to 125

TI functional safety category

Functional Safety-Compliant

Package

HTQFP (PHP)-48-81 mm² 9 x 9

Features

  • AEC-Q100 qualified –40°C to +125°C
  • Functional safety compliant
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D
    • Hardware capability up to ASIL D
  • 17 single-ended voltage channels
    • High voltage pack, link, charge measurement accuracy update to 0.2%
    • Pack and cell sync to 64uS
  • 15 GPIO inputs as IO, I2C, SPI, ADC and temp sense
  • Dedicated MOSFET switch drive pins
  • Intelligent SPI contoller HUB
    • Support multiple SPI peripheral devices
    • HW pin to trigger contactor drivers and Pyro Fuse drivers
  • Stackable and register map compatible with BQ7971x-Q1 cell monitors
  • AEC-Q100 qualified –40°C to +125°C
  • Functional safety compliant
    • Documentation to aid ISO 26262 system design
    • Systematic capability up to ASIL D
    • Hardware capability up to ASIL D
  • 17 single-ended voltage channels
    • High voltage pack, link, charge measurement accuracy update to 0.2%
    • Pack and cell sync to 64uS
  • 15 GPIO inputs as IO, I2C, SPI, ADC and temp sense
  • Dedicated MOSFET switch drive pins
  • Intelligent SPI contoller HUB
    • Support multiple SPI peripheral devices
    • HW pin to trigger contactor drivers and Pyro Fuse drivers
  • Stackable and register map compatible with BQ7971x-Q1 cell monitors

Description

The device can be used to measure divided down high voltage nodes in a battery system. It can measure voltage across Fuse, Contactors and check isolation voltage in battery junction box (BJB) system. There are 15 GPIOs/auxiliary inputs that can be used for HV measurements, thermistor measurements and driving relays. There are 4 SW outputs that can be used to drive MOSFET switches in the measurement path. The device can function as a SPI HUB and interface with up to 8 separate SPI devices/groups. The isolated bi-directional daisy chain ports support both capacitor and transformer based isolation. The device can also communicate with MCU over SPI and UART.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request