0
BQ77307
  • BQ77307
  • BQ77307

BQ77307

ACTIVE

Low-power protector for 2S to 7S with high accuracy cell voltage measurement

Texas Instruments BQ77307 Product Info

1 April 2026 6

Parameters

Rating

Catalog

Number of series cells (max)

7

Number of series cells (min)

2

Features

FET drive, Low-side driver, Open wire (OW), Over-temperature (OT), Overcurrent during charge (OCC), Overcurrent during discharge (OCD), Overvoltage, Short-circuit Discharge (SCD), Under-temperature (UT), Undervoltage

Function

Protection

Operating current (typ) (µA)

6

Vin (max) (V)

38.5

Operating temperature range (°C)

-40 to 110

Battery overvoltage protection (min) (V)

0

Battery overvoltage protection (max) (V)

5.5

Package

VQFN (RGR)-20-12.25 mm² 3.5 x 3.5

Features

  • Primary or secondary voltage, current, and temperature protection for 2-series to 7-series cells with an autonomous recovery option
  • Voltage protection:
    • Cell overvoltage (COV): 0 V–5.5 V in 1-mV steps, ±4-mV accuracy
    • Cell undervoltage (CUV): 0 V–5.5 V in 1-mV steps, ±4-mV accuracy
  • Current protection:
    • Short circuit in discharge (SCD): 10 mV–500 mV, varying steps
    • Overcurrent in charge (OCC): 3 mV–123 mV, 2-mV steps
    • Overcurrent in discharge 1 and 2 (OCD1 and OCD2): 4 mV–200 mV, 2-mV steps
  • Temperature protection using external NTC thermistor:
    • Overtemperature in charge and discharge (OTC and OTD)
    • Undertemperature in charge and discharge (UTC and UTD)
    • Internal die overtemperature
  • Integrated low-side drivers for NFET protection with an optional autonomous recovery
  • Low power operation:
    • NORMAL mode, both FETs enabled: 8 µA
    • NORMAL mode, FETs disabled: 5 µA
    • SHUTDOWN Mode: < 1 µA
  • High voltage tolerance of 45 V on cell connect and select additional pins
  • Integrated one-time-programmable (OTP) memory for device settings, programmed by TI
  • Programmable interrupt for host processor, status information available through I 2C
  • 400-kHz I 2C serial communications with optional CRC support
  • Programmable LDO for external system usage
  • 20-pin QFN 3.5 mm × 3.5 mm × 0.9 mm (RGR) package
  • Primary or secondary voltage, current, and temperature protection for 2-series to 7-series cells with an autonomous recovery option
  • Voltage protection:
    • Cell overvoltage (COV): 0 V–5.5 V in 1-mV steps, ±4-mV accuracy
    • Cell undervoltage (CUV): 0 V–5.5 V in 1-mV steps, ±4-mV accuracy
  • Current protection:
    • Short circuit in discharge (SCD): 10 mV–500 mV, varying steps
    • Overcurrent in charge (OCC): 3 mV–123 mV, 2-mV steps
    • Overcurrent in discharge 1 and 2 (OCD1 and OCD2): 4 mV–200 mV, 2-mV steps
  • Temperature protection using external NTC thermistor:
    • Overtemperature in charge and discharge (OTC and OTD)
    • Undertemperature in charge and discharge (UTC and UTD)
    • Internal die overtemperature
  • Integrated low-side drivers for NFET protection with an optional autonomous recovery
  • Low power operation:
    • NORMAL mode, both FETs enabled: 8 µA
    • NORMAL mode, FETs disabled: 5 µA
    • SHUTDOWN Mode: < 1 µA
  • High voltage tolerance of 45 V on cell connect and select additional pins
  • Integrated one-time-programmable (OTP) memory for device settings, programmed by TI
  • Programmable interrupt for host processor, status information available through I 2C
  • 400-kHz I 2C serial communications with optional CRC support
  • Programmable LDO for external system usage
  • 20-pin QFN 3.5 mm × 3.5 mm × 0.9 mm (RGR) package

Description

The Texas Instruments BQ77307 family of products features a highly integrated,high-accuracy primary protector for 2-series to 7-series Li-ion, Li-polymer, LiFePO 4 (LFP), and LTO battery packs. Each device includes a high-accuracy voltage, current, and temperature protection subsystem with integrated low-side protection NFET drivers and a programmable LDO for external system use. The BQ77307 provides an interrupt to a host processor and integrates an I 2C host communication interface, supporting up to 400-kHz operation with optional CRC to read status information and program settings. The BQ77307 is available in a 20-pin QFN package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request