0
BQ27621-G1
  • BQ27621-G1

BQ27621-G1

ACTIVE

System-side fuel gauge with Dynamic Voltage Correlation, battery gas gauge Linux Mainline Status

Texas Instruments BQ27621-G1 Product Info

1 April 2026 7

Parameters

Cell chemistry

Li-Ion/Li-Polymer

Number of series cells

Single Cell

Communication interface

I2C

Battery capacity (min) (mAh)

100

Battery capacity (max) (mAh)

32000

Implementation

System

External capacity indication

None

Features

No Sense Resistor Required

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Package

DSBGA (YZF)-9-3.0625 mm² 1.75 x 1.75

Features

  • Single-Cell Li-Ion Battery Fuel Gauge
    • Resides on System Board
    • Supports Embedded or Removable Batteries
    • Powered Directly from Battery with Integrated
      LDO
  • Easy To Configure Fuel Gauging Based on the
    Dynamic Voltage Correlation Algorithm
    • Reports Remaining Capacity and State of
      Charge (SOC) with Smoothing Filter
    • Automatically Adjusts for Self-Discharge,
      Temperature, and Rate Changes
  • Microcontroller Peripheral Supports:
    • 400-kHz I2C Serial Interface
    • Configurable SOC Interrupt or
      Battery Low Digital Output Warning
    • Internal Temperature Sensor or
      Host Reported Temperature
  • Support 4.2-V, 4.3-V, and 4.35-V Chemistries
  • 9-pin 1.62 × 1.58 mm, 0.5 mm pitch YZF package
  • Single-Cell Li-Ion Battery Fuel Gauge
    • Resides on System Board
    • Supports Embedded or Removable Batteries
    • Powered Directly from Battery with Integrated
      LDO
  • Easy To Configure Fuel Gauging Based on the
    Dynamic Voltage Correlation Algorithm
    • Reports Remaining Capacity and State of
      Charge (SOC) with Smoothing Filter
    • Automatically Adjusts for Self-Discharge,
      Temperature, and Rate Changes
  • Microcontroller Peripheral Supports:
    • 400-kHz I2C Serial Interface
    • Configurable SOC Interrupt or
      Battery Low Digital Output Warning
    • Internal Temperature Sensor or
      Host Reported Temperature
  • Support 4.2-V, 4.3-V, and 4.35-V Chemistries
  • 9-pin 1.62 × 1.58 mm, 0.5 mm pitch YZF package

Description

The Texas Instruments bq27621-G1 is a minimally configured microcontroller peripheral that provides system-side fuel gauging for single-cell Li-Ion batteries. The device requires very little user configuration and system microcontroller firmware development.

The bq27621-G1 uses the Dynamic Voltage Correlation algorithm for fuel gauging. This process eliminates the need for a sense resistor when calculating remaining battery capacity (mAh), state-of-charge (%), battery voltage (mV), and temperature (°C).

Battery fuel gauging with the bq27621-G1 requires connections only to PACK+ (P+) and PACK– (P–) for a removable battery pack or embedded battery circuit. The tiny 9-pin, 1.62 mm × 1.58 mm, 0.5 mm pitch YZF package is ideal for space-constrained applications.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request