0
BQ27520-G4
  • BQ27520-G4
  • BQ27520-G4

BQ27520-G4

ACTIVE

System side Impedance Track™ fuel gauge with integrated LDO.

Texas Instruments BQ27520-G4 Product Info

1 April 2026 7

Parameters

Cell chemistry

Li-Ion/Li-Polymer

Number of series cells

Single Cell

Communication interface

I2C

Battery capacity (min) (mAh)

100

Battery capacity (max) (mAh)

32000

Implementation

System

External capacity indication

None

Features

Impedance Track™ algorithm

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Package

DSBGA (YZF)-15-4.8125 mm² 1.75 x 2.75

Features

  • Single-series cell Li-ion battery fuel gauge resides on system board
    • Integrated 2.5 VDC LDO
    • External low-value 10-mΩ sense resistor
  • Patented Impedance Track™technology
    • Adjusts for battery aging, self-discharge, temperature, and rate changes
    • Reports remaining capacity, state-of-charge (SOC), and time-to-empty
    • Optional smoothing filter
    • Battery state-of-health (aging) estimation
    • Supports embedded or removable packs with up to 14500-mAhcapacity
    • Accommodates pack swapping with twoseparate battery profiles
  • Microcontroller peripheral supports
    • 400-kHz I2C serial interface
    • 32 bytes of scratch-pad FLASH NVM
    • Battery low digital output warning
    • Configurable SOC interrupts
    • External thermistor, internal sensor, or host-reported temperature options
  • Tiny 15-pin, 2610 × 1956 µm, 0.5-mm pitch NanoFree™ (DSBGA) package
  • Single-series cell Li-ion battery fuel gauge resides on system board
    • Integrated 2.5 VDC LDO
    • External low-value 10-mΩ sense resistor
  • Patented Impedance Track™technology
    • Adjusts for battery aging, self-discharge, temperature, and rate changes
    • Reports remaining capacity, state-of-charge (SOC), and time-to-empty
    • Optional smoothing filter
    • Battery state-of-health (aging) estimation
    • Supports embedded or removable packs with up to 14500-mAhcapacity
    • Accommodates pack swapping with twoseparate battery profiles
  • Microcontroller peripheral supports
    • 400-kHz I2C serial interface
    • 32 bytes of scratch-pad FLASH NVM
    • Battery low digital output warning
    • Configurable SOC interrupts
    • External thermistor, internal sensor, or host-reported temperature options
  • Tiny 15-pin, 2610 × 1956 µm, 0.5-mm pitch NanoFree™ (DSBGA) package

Description

The Texas Instruments BQ27520-G4 system-side Li-ion battery fuel gauge is a microcontroller peripheral that provides fuel gauging for single-cell Li-ion battery packs. The device requires little system microcontroller firmware development. The fuel gauge resides on the main board of the system and manages an embedded battery (non-removable) or a removable battery pack.

The fuel gauge uses the patented Impedance Track™ algorithm for fuel gauging, and provides information such as remaining battery capacity (mAh), state-of-charge (%), run-time to empty (minimum), battery voltage (mV), temperature (°C), and state of health (%).

Battery fuel gauging requires only PACK+ (P+), PACK– (P–), and optional Thermistor (T) connections to a removable battery pack or embedded battery circuit. The device uses a 15-ball NanoFree™ (DSBGA) package in the nominal dimensions of 2610 × 1956 µm with 0.5-mm lead pitch. It is ideal for space-constrained applications.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request