0
BQ27427
  • BQ27427
  • BQ27427

BQ27427

ACTIVE

Single-cell battery fuel gauge with pre-programmed chemistry and integrated sense resistor Linux Mainline Status

Texas Instruments BQ27427 Product Info

1 April 2026 10

Parameters

Cell chemistry

Li-Ion/Li-Polymer

Number of series cells

Single Cell

Communication interface

I2C

Battery capacity (min) (mAh)

100

Battery capacity (max) (mAh)

8000

Implementation

System

External capacity indication

None

Features

Impedance Track™ algorithm, Integrated Sense Resistor

Operating temperature range (°C)

-40 to 85

Rating

Catalog

Package

DSBGA (YZF)-9-3.0625 mm² 1.75 x 1.75

Features

  • Single-cell Li-ion battery fuel gauge
    • Resides on system board
    • Supports embedded or removable batteries
    • Powers directly from the battery with integrated LDO
    • Integrates low-value sense resistor: 7mΩ
  • Ultra low power consumption
    • NORMAL mode: 50µA
    • SLEEP mode: 9µA
  • Battery fuel gauging based on patented Impedance Track™ technology
    • Provides three selectable preprogrammed profiles for 4.2V, 4.35V, and 4.4V cells
    • Reports remaining capacity and state-of-charge (SOC) with smoothing filter
    • Adjusts automatically for battery aging, self-discharge, temperature, and rate changes
    • Estimates battery state-of-health (aging)
  • Microcontroller peripheral interface supports:
    • I2C serial interface: 400kHz
    • Configurable SoC interrupt or battery low digital output warning
    • Internal temperature sensor or host reported temperature or external thermistor
  • Single-cell Li-ion battery fuel gauge
    • Resides on system board
    • Supports embedded or removable batteries
    • Powers directly from the battery with integrated LDO
    • Integrates low-value sense resistor: 7mΩ
  • Ultra low power consumption
    • NORMAL mode: 50µA
    • SLEEP mode: 9µA
  • Battery fuel gauging based on patented Impedance Track™ technology
    • Provides three selectable preprogrammed profiles for 4.2V, 4.35V, and 4.4V cells
    • Reports remaining capacity and state-of-charge (SOC) with smoothing filter
    • Adjusts automatically for battery aging, self-discharge, temperature, and rate changes
    • Estimates battery state-of-health (aging)
  • Microcontroller peripheral interface supports:
    • I2C serial interface: 400kHz
    • Configurable SoC interrupt or battery low digital output warning
    • Internal temperature sensor or host reported temperature or external thermistor

Description

The Texas Instruments BQ27427 battery fuel gauge is a single-cell gauge that requires minimal user-configuration and system microcontroller firmware development, leading to quick system bring-up.

Three chemistry profiles are preprogrammed to enable minimal user-configuration and to help manage user inventory across projects with different battery chemistries. The BQ27427 battery fuel gauge has very low sleep power consumption, leading to longer battery run time. Configurable interrupts help to save system power and free the host from continuous polling. An external thermistor supports accurate temperature sensing.

The BQ27427 battery fuel gauge uses the patented Impedance Track™ algorithm for fuel gauging, and provides information such as remaining battery capacity (mAh), state-of-charge (%), and battery voltage (mV).

Battery fuel gauging with the BQ27427 fuel gauge requires connections only to PACK+ (P+) and PACK– (P–) for a removable battery pack or embedded battery circuit. The tiny, 9-ball, 1.62mm × 1.58mm, 0.5mm pitch NanoFree™ chip scale package (DSBGA) is appropriate for space-constrained applications.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request