0
BQ25692-Q1
  • BQ25692-Q1

BQ25692-Q1

PREVIEW

Automotive stand-alone or I²C-controlled 40V bidirectional buck-boost charger with power path

Texas Instruments BQ25692-Q1 Product Info

1 April 2026 9

Parameters

Rating

Automotive

Number of series cells

1, 2, 3, 4, 5, 6, 7

Cell chemistry

Li-Ion/Li-Polymer, Lithium Phosphate/LiFePO4, SuperCap

Charge current (max) (A)

3

Features

AEC-Q100 Automotive Qual, BAT temp thermistor monitoring (JEITA profile), BAT temp thermistor monitoring (hot/cold profile), IC thermal regulation, IINDPM (Input current limit), Input OVP, USB C/PD compatible, USB OTG integrated, VINDPM (Input voltage threshold to maximize adaptor power)

Vin (min) (V)

2.9

Vin (max) (V)

45

Absolute max Vin (max) (V)

45

Control topology

Switch-Mode Buck-boost

Battery charge voltage (min) (V)

0

Battery charge voltage (max) (V)

33

Control interface

I2C, Standalone (RC-Settable)

Operating temperature range (°C)

-40 to 125

Package

WQFN-HR (RBA)-26-14 mm² 3.5 x 4

Features

  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ 125°C
  • High integration buck-boost forward (sink) mode charger for 1- to 7-cell Li-Ion batteries supporting USB PD profile with integrated switching MOSFETs and loop compensation
  • Highly efficient
    • Programmable switching frequency from 450kHz to 1.2MHz
    • Bypass mode for >98.5% efficiency USB-PD PPS direct battery charging at 20V, 3A
    • Selectable PFM with out-of-audio (OOA) operation for light load efficiency improvement
  • Supports a wide range of input sources with 2.5V to 36V operating range and 45V absolute maximum rating
    • Support VIN down to 2.5V with VBAT > 3.2V
    • USB-PD input
    • Input voltage dynamic power management (VINDPM) up to 36V to prevent input source overload
    • Optional input current dynamic power management (IINDPM) up-to 3.3A for maximum power limit
  • I2C controlled for optimal system performance with resistor-programmable option
    • Hardware selectable default cell count, charge voltage, input and charge current limits
    • 3A charging current with 20mA resolution
  • Reverse/OTG (source) mode powers input port from battery
    • 3.5V to 34V reverse output voltage with 20mV resolution to support USB-PD PPS
    • Up-to 3.3A reverse output current regulation with 20mA resolution to support USB-PD PPS
  • Low quiescent current
    • TBD µA for battery only operation
    • TBD µA for converter switching
  • High accuracy
    • TBD charge voltage regulation
    • TBD input/output current regulation
  • Safety
    • Input and battery OVP
    • Thermal regulation and thermal shutdown
    • Converter MOSFETs OCP
    • Charging safety timer
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ 125°C
  • High integration buck-boost forward (sink) mode charger for 1- to 7-cell Li-Ion batteries supporting USB PD profile with integrated switching MOSFETs and loop compensation
  • Highly efficient
    • Programmable switching frequency from 450kHz to 1.2MHz
    • Bypass mode for >98.5% efficiency USB-PD PPS direct battery charging at 20V, 3A
    • Selectable PFM with out-of-audio (OOA) operation for light load efficiency improvement
  • Supports a wide range of input sources with 2.5V to 36V operating range and 45V absolute maximum rating
    • Support VIN down to 2.5V with VBAT > 3.2V
    • USB-PD input
    • Input voltage dynamic power management (VINDPM) up to 36V to prevent input source overload
    • Optional input current dynamic power management (IINDPM) up-to 3.3A for maximum power limit
  • I2C controlled for optimal system performance with resistor-programmable option
    • Hardware selectable default cell count, charge voltage, input and charge current limits
    • 3A charging current with 20mA resolution
  • Reverse/OTG (source) mode powers input port from battery
    • 3.5V to 34V reverse output voltage with 20mV resolution to support USB-PD PPS
    • Up-to 3.3A reverse output current regulation with 20mA resolution to support USB-PD PPS
  • Low quiescent current
    • TBD µA for battery only operation
    • TBD µA for converter switching
  • High accuracy
    • TBD charge voltage regulation
    • TBD input/output current regulation
  • Safety
    • Input and battery OVP
    • Thermal regulation and thermal shutdown
    • Converter MOSFETs OCP
    • Charging safety timer

Description

The BQ25692-Q1 is a fully integrated switch-mode buck-boost charger for 1- to 7cell Li-ion batteries, Li-polymer batteries. Wide input voltage range from 2.5V to 36V supports applications powered from battery, standard USB-PD adapters and high voltage dedicated DC adapters. The device integrates 4 switching MOSFETs and all the converter loop compensation for small solution size with simple design. The device also supports the full input (sink) and output (reverse or source mode) voltage ranges for USB Type-C and USB power delivery (USB-PD) applications.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request