0
BQ25505
  • BQ25505
  • BQ25505

BQ25505

ACTIVE

Ultra low power harvester power management IC with boost charger, and autonomous power multiplexor

Texas Instruments BQ25505 Product Info

1 April 2026 7

Parameters

Rating

Catalog

Number of series cells

1

Cell chemistry

Li-Ion/Li-Polymer, SuperCap

Charge current (max) (A)

0.1

Features

Input OVP, Solar input/MPPT

Vin (min) (V)

0.6

Vin (max) (V)

5.1

Absolute max Vin (max) (V)

5.5

Control topology

Switch-Mode Boost

Battery charge voltage (min) (V)

2.2

Battery charge voltage (max) (V)

5.5

Control interface

Standalone (RC-Settable)

Operating temperature range (°C)

-40 to 125

Package

VQFN (RGR)-20-12.25 mm² 3.5 x 3.5

Features

  • Ultra Low-Power With High-Efficiency DC-DC Boost Charger
    • Cold-Start Voltage: VIN ≥ 600 mV
    • Continuous Energy Harvesting From Input Sources as Low as 100 mV
    • Ultra-Low Quiescent Current of 325 nA
    • Input Voltage Regulation Prevents Collapsing High-Impedance Input Sources
    • Ship Mode With < 5 nA From Battery
  • Energy Storage
    • Energy can be Stored to Rechargeable Li-Ion Batteries, Thin-Film Batteries, Super-Capacitors, or Conventional Capacitors
  • Battery Charging and Protection
    • Internally Set Undervoltage Level
    • User-Programmable Overvoltage Level
  • Battery-Good Output Flag
    • Programmable Threshold and Hysteresis
    • Warn Attached Microcontrollers of Pending Loss of Power
    • Can be Used to Enable or Disable System Loads
  • Programmable Maximum Power Point Tracking (MPPT)
    • Integrated MPPT for Optimal Energy Extraction From a Variety of Energy Harvesters
  • Gate Drivers for Primary (Nonrechargeable) and Secondary (Rechargeable) Storage Element Multiplexing
    • Autonomous Switching Based on VBAT_OK
    • Break-Before-Make Prevents System Rail Droop
  • Ultra Low-Power With High-Efficiency DC-DC Boost Charger
    • Cold-Start Voltage: VIN ≥ 600 mV
    • Continuous Energy Harvesting From Input Sources as Low as 100 mV
    • Ultra-Low Quiescent Current of 325 nA
    • Input Voltage Regulation Prevents Collapsing High-Impedance Input Sources
    • Ship Mode With < 5 nA From Battery
  • Energy Storage
    • Energy can be Stored to Rechargeable Li-Ion Batteries, Thin-Film Batteries, Super-Capacitors, or Conventional Capacitors
  • Battery Charging and Protection
    • Internally Set Undervoltage Level
    • User-Programmable Overvoltage Level
  • Battery-Good Output Flag
    • Programmable Threshold and Hysteresis
    • Warn Attached Microcontrollers of Pending Loss of Power
    • Can be Used to Enable or Disable System Loads
  • Programmable Maximum Power Point Tracking (MPPT)
    • Integrated MPPT for Optimal Energy Extraction From a Variety of Energy Harvesters
  • Gate Drivers for Primary (Nonrechargeable) and Secondary (Rechargeable) Storage Element Multiplexing
    • Autonomous Switching Based on VBAT_OK
    • Break-Before-Make Prevents System Rail Droop

Description

The bq25505 device is specifically designed to efficiently extract the microwatts (µW) to miliwatts (mW) of power generated from a variety of DC energy harvesting, high-impedance sources like photovoltaic (solar) or thermal electric generators (TEGs) without collapsing those sources. The battery-management features of the bq25505 ensure that a secondary rechargeable battery is not overcharged by this extracted power, with voltage boosted, nor depleted beyond safe limits by a system load. The integrated multiplexer gate drivers autonomously switch the system load to a primary nonrechargeable battery if the secondary battery voltage falls below the user-defined VBAT_OK threshold.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request