0
dsPIC33FJ16GS404
  • dsPIC33FJ16GS404
  • dsPIC33FJ16GS404

dsPIC33FJ16GS404

In Production

These devices offer features supporting common, multi-loop digital switch-mode power supplies (SMPS) and other digital power-conversion applications such as: AC to DC Converters, DC to DC Converters, Power Factor Correction (PFC), Uninterruptible power supply (UPS), Inverters, Embedded Power-Supply Controllers, Circuit Breakers, Arc Fault Detection

Microchip Technology dsPIC33FJ16GS404 Product Info

16 April 2026 0

Parameters

ADC Resolution (bits)

10

ADC Sampling Rate (ksps)

2000

ADC Modules

1

CAN/CAN-FD

0

Type of CAN module

None

Configurable Logic Cell (CLC/CCL)

0

CPU

dsPIC® DSC

CPU Speed (MIPS/DMIPS)

50

Number of Comparators

0

DAC Resolution (Bits)

0

DAC Outputs

0

Number of DACs

0

Hardware RTCC/RTC

No

Number of PWM Time Bases

4

Operation Voltage Max.(V)

3.6

Operation Voltage Min.(V)

3

Output Compare Channels

2

SMPS

6

Segmented LCD (# of segments)

0

USB

None

Program Memory size (KB)

16

Peripheral Pin Select / Pin Muxing

Yes

Direct Memory Access (DMA) Channels

0

Multiple Flash Panels

No

Graphics Controller/GPU

No

Motor Control PWM Outputs

6

Quadrature Encoder Interface

0

Low Power

No

ADC Channels

8

Pincount

44

Crypto Engine

No

TempRange Min

-40

TempRange Max

150

Features

    Operating Conditions
  • 3.0V to 3.6V, -40ºC to +150ºC, DC to 20 MIPS
  • 3.0V to 3.6V, -40ºC to +125ºC, DC to 40 MIPS
  • 3.0V to 3.6V, -40ºC to +85ºC, DC to 50 MIPS
    Core: 16-Bit dsPIC33F CPU
  • Code-Efficient (C and Assembly) Architecture
  • Two 40-Bit Wide Accumulators
  • Single-Cycle (MAC/MPY) with Dual Data Fetch
  • Single-Cycle Mixed-Sign MUL plus Hardware Divide
  • 32-Bit Multiply Support
    Clock Management
  • ±2.0% Internal Oscillator
  • Programmable PLLs and Oscillator Clock Sources
  • Fail-Safe Clock Monitor (FSCM)
  • Independent Watchdog Timer (WDT)
  • Fast Wake-up and Start-up
    Power Management
  • Low-Power Management modes (Sleep, Idle, Doze)
  • Integrated Power-on Reset and Brown-out Reset
    High-Speed PWM
  • Up to Four PWM Pairs with Independent Timing
  • Dead Time for Rising and Falling Edges
  • 1.04 ns PWM Resolution
  • PWM Support for: DC/DC, AC/DC, Inverters, PFC and Lighting
  • Programmable Fault Inputs
  • Flexible Trigger Configurations for ADC Conversions
    Advanced Analog Features
  • ADC module: 10-bit resolution with up to 2 Successive Approximation Register (SAR) converters (4 Msps) and up to six Sample-and-Hold (S&H) circuits
  • Flexible and Independent ADC Trigger Sources
  • Up to Four High-Speed Comparators with Direct Connection to the PWM module
    Timers/Output Compare/Input Capture
  • Three General Purpose Timers: Three 16-bit and one 32-bit timer/counter
  • Two Output Compare (OC) modules
  • Two Input Capture (IC) modules
  • Peripheral Pin Select (PPS) to allow Function Remap
    Communication Interfaces
  • UART module (12.5 Mbps): With support for LIN/J2602 protocols and IrDA®
  • 4-Wire SPI module
  • I2C™ module (up to 1 Mbaud) with SMBus Support
  • PPS to allow Function Remap Input/Output
  • Sink/Source 18 mA on 8 Pins, 10 mA on 10 Pins and 6 mA on 17 Pins
  • 5V Tolerant Pins
  • Selectable Open-Drain and Pull-ups
  • External Interrupts on up to 30 I/O Pins

Description

These devices offer features supporting common, multi-loop digital switch-mode power supplies (SMPS) and other digital power-conversion applications such as: AC to DC Converters, DC to DC Converters, Power Factor Correction (PFC), Uninterruptible power supply (UPS), Inverters, Embedded Power-Supply Controllers, Circuit Breakers, Arc Fault Detection

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request