0
PIC32MZ2048ECM124
  • PIC32MZ2048ECM124

PIC32MZ2048ECM124

Not Recommended for new designs

Engineered for the demands of Industrial, Automotive, IoT, HMI, and Motor Control applications, the PIC32MZ EF family of microcontrollers offers the pinnacle of connectivity and performance. For new designs, consider the PIC32MZ2048EFM124. This family features high-speed MCUs running up to 252 MHz with up to 2 MB of Live-Update Flash and 512 KB SRAM. It seamlessly integrates Audio and Graphics Interfaces, High-Speed USB, Ethernet, and Advanced Analog. Experience unparalleled efficiency with a best-in-class peripheral set, including I2S/SPI, Parallel Master Port, External Bus Interface, a 48-channel ADC, Hi-Speed USB 2.0, Ethernet MAC, Serial Quad Interface, and a robust Crypto Engine for secure encryption and decryption.These devices come with full support from the MPLAB® Harmony...

Microchip Technology PIC32MZ2048ECM124 Product Info

16 April 2026 0

Parameters

Part Family

PIC32MZEC

CPU Type

32-bit MIPS MCU

MaxSpeed (MHz)

200

Program Memory Size (KB)

2048

SRAM (KB)

512

Temp. Range Min.

-40

Temp. Range Max.

85

Operation Voltage Min.(V)

2.2

Operation Voltage Max.(V)

3.6

SPI

6

I2C

5

UART

6

QSPI

1

Crypto Engine

Yes

Internal Oscillator

8 MHz, 32 kHz

Pin Count

124

Features

  • 200 MHz/330 DMIPS, microAptiv core
  • DSP-enhanced core:
  • Four 64-bit accumulators
  • Single-cycle MAC, saturating and fractional math
  • Dual Panel Flash for live update support
  • 10-bit, 500 KSPS, 48-channel ADC module
  • Memory Management Unit for optimum embedded OS execution
  • microMIPS mode for up to 35% code compression
  • CAN, UART, I2C, PMP, EBI, SQI & Analog Comparators
  • SPI/I2S interfaces for audio processing and playback
  • Hi-Speed USB 2.0 Device/Host/OTG
  • 10/100 Mbps Ethernet MAC with MII and RMII interface
  • Crypto Engine with a RNG for data encryption/decryption and authentication (AES, 3DES, SHA, MD5, and HMAC)
  • Temperature Range:
  • 40°C to 85°C;
  • 40°C to 125°C (planned)
  • Operating voltage range of 2.2V to 3.6V
  • 2MB Flash memory (plus an additional 160 KB of Boot Flash)
  • 512KB SRAM memory
  • microMIPS mode for up to 35% smaller code size
  • DSP-enhanced core:
  • Four 64-bit accumulators
  • Single-cylce MAC, saturating and fractional math
  • Code-efficient (C and Assembly) architecture
  • Low-power management modes (Idle and Sleep)
  • 50 MHz External Bus Interface (EBI)
  • 50 MHz Serial Quad Interface (SQI)
  • Peripheral Pin Select (PPS) functionality to enable function remap
  • 8 channels of hardware programmable DMA and 18 channels of dedicated DMA with automatic data size detection
  • Six UART modules (25 Mbps): Supports LIN 1.2 and IrDA protocols
  • Two CAN modules 2.0B Active with DeviceNet addressing support
  • Six 4-wire SPI modules (50 Mbps)
  • SQI configurable as an additional SPI module (50 MHz)
  • Five I2C modules (up to 1 Mbaud) with SMBus support
  • Parallel Master Port (PMP)
  • Hardware Real-Time Clock and Calendar (RTCC)
  • Nine 16-bit Timers/Counters (four 16-bit pairs combine to create four 32-bit timers)
  • Nine Capture inputs and Nine Compare/PWM outputs
  • Graphics interface: EBI or PMP
  • Audio data communication: I2S, LJ, RJ, USB
  • Audio data control interface: SPI and I2C™
  • Audio data master clock: Fractional clock frequencies with USB synchronization
  • 10-bit ADC Module:
  • 500 Ksps rate with one Sample and Hold (S&H) circuits
  • Up to 48 analog inputs
  • Flexible and independent ADC trigger sources
  • 6 digital filters and comparators
  • Two analog comparators with 32 programmable voltage references
  • Temperature sensor with ±2°C accuracy
  • In-circuit and in-application programming
  • 4-wire MIPS® Enhanced JTAG interface
  • Unlimited program and 12 complex data breakpoints
  • IEEE 1149.2-compatible (JTAG) boundary scan
  • Non-intrusive hardware-based instruction trace
  • Description

    Engineered for the demands of Industrial, Automotive, IoT, HMI, and Motor Control applications, the PIC32MZ EF family of microcontrollers offers the pinnacle of connectivity and performance. 

    For new designs, consider the PIC32MZ2048EFM124

    This family features high-speed MCUs running up to 252 MHz with up to 2 MB of Live-Update Flash and 512 KB SRAM. It seamlessly integrates Audio and Graphics Interfaces, High-Speed USB, Ethernet, and Advanced Analog. Experience unparalleled efficiency with a best-in-class peripheral set, including I2S/SPI, Parallel Master Port, External Bus Interface, a 48-channel ADC, Hi-Speed USB 2.0, Ethernet MAC, Serial Quad Interface, and a robust Crypto Engine for secure encryption and decryption.

    These devices come with full support from the MPLAB® Harmony integrated software framework and are AECQ-100 Grade 1 qualified, ensuring reliable operation up to 125°C.                                   

    Subscribe to Welllinkchips !
    Your Name
    * Email
    Submit a request