Product
0
ATWINC1510
  • ATWINC1510

ATWINC1510

In Production

Microchip's ATWINC1510 is an IEEE 802.11 b/g/n IoT network controller. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and Network capabilities through SPI-to-Wi-Fi interface. It connects to any SAM or PIC MCU with minimal resource requirements.The ATWINC1510's most advanced mode is a single stream 1x1 802.11n mode. Its networking stack consists of HTTP, TCP, IP and Ethernet Protocols corresponding to Application, Transport, Internet and Data Link Layers.The ATWINC1510 Features:A fully integrated Power Amplifier, LNA, Switch and Power Management.Internal Flash memory to store firmwareAnd only requires a high-speed crystal or oscillator (26 MHz) as a clock sourceThe ATWINC1510 is available in a QFN package or as a certified module.Expanding on the ATWINC1500 with 4MB Flash, ...

Microchip Technology ATWINC1510 Product Info

16 April 2026 0

Parameters

Antenna Type

PCB,U.FL

Frequency Range

2.4

Operating Temp (°C) Min

-40

Operating Temp (°C) Max

85

Operating Voltage (V) Min

3

Operating Voltage (V) Max

4.2

Power Down Mode Current Consumption (uA)

4

RX Current Consumption (mA)

83

TX Current Consumption (mA)

287

SoftAP Client Count

1

Supported Host OS

Non-OS

TX Output Power (dBm)

18.5

Wi-Fi Security

WPA, WPA2, WEP

Regulatory

FCC, CE, ISED

Encryption

WEP, WPA-TKIP, WPA2, CCMP-AES

Features

  • Single-band 2.4GHz b/g/n
  • Compatible with Wi-Fi 6/7 2.4 GHz band
  • Extreme low power
  • Compact footprint: 5 x 5 mm QFN
  • Operating voltage: 3.0V to 4.2V
  • Serial host interface: SPI
  • Security protocols supported:  WPA/WPA2 Personal, TLS, SSL
  • Network services:  DHCP, DNS, TCP/IP (IPv4), UDP, HTTP, HTTPS
  • Antenna Options: Chip and PCB antenna (ATWINC1500-MR210PB) Chip and u.FL connector (ATWINC1500-MR210UB)
  • Chip and PCB antenna (ATWINC1500-MR210PB)
  • Chip and u.FL connector (ATWINC1500-MR210UB)
  • Available in a fully-certified module package:  ATWINC1500-MR210PB1952 (4Mb flash) ATWINC1510-MR210PB1952 (8Mb flash)
  • ATWINC1500-MR210PB1952 (4Mb flash)
  • ATWINC1510-MR210PB1952 (8Mb flash)
  • Part numbers reflect SW version, now available with SDK v19.5.2 ATWINC15x0-MR210xB1952 Recommended for new designs SDK 19.5.2 with TLS v1.2 server mode support, Crypto ECC508 integration, WPA2 security to AP mode & more Integrated into Atmel Studio 7 - See ASF release notes ATWINC1510-MR210PB1944 (Legacy SDK)
  • ATWINC15x0-MR210xB1952 Recommended for new designs SDK 19.5.2 with TLS v1.2 server mode support, Crypto ECC508 integration, WPA2 security to AP mode & more Integrated into Atmel Studio 7 - See ASF release notes
  • Recommended for new designs
  • SDK 19.5.2 with TLS v1.2 server mode support, Crypto ECC508 integration, WPA2 security to AP mode & more
  • Integrated into Atmel Studio 7 - See ASF release notes
  • ATWINC1510-MR210PB1944 (Legacy SDK)
  • Atmel Software Framework (ASF) Free Software download available

    • Description

    Microchip's ATWINC1510 is an IEEE 802.11 b/g/n IoT network controller. It is the ideal add-on to existing MCU solutions bringing Wi-Fi and Network capabilities through SPI-to-Wi-Fi interface. It connects to any SAM or PIC MCU with minimal resource requirements.

    The ATWINC1510's most advanced mode is a single stream 1x1 802.11n mode. Its networking stack consists of HTTP, TCP, IP and Ethernet Protocols corresponding to Application, Transport, Internet and Data Link Layers.

    The ATWINC1510 Features:

    • A fully integrated Power Amplifier, LNA, Switch and Power Management.
    • Internal Flash memory to store firmware
    • And only requires a high-speed crystal or oscillator (26 MHz) as a clock source

    The ATWINC1510 is available in a QFN package or as a certified module.

    Expanding on the ATWINC1500 with 4MB Flash, the ATWINC1510 adds 8MB flash memory for even greater flexibility and the ability to store Host MCU files.

    A MCU host driver can be found in the Advanced Software Framework (ASF) and in MPLAB® Harmony v3.

    Microchip's complimentary and confidential Wireless Check online design review service is available for customers who have selected our products for their application design-in*.

    *The online design review service is subject to Microchip's Program Terms and Conditions and requires a myMicrochip account.


    Firmware

    The latest major firmware release is: v19.7.7 and is available in GitHub. You will find the firmware package and release notes in the documents section of this page. Click here for the Firmware Release Summary.

    Latest module firmware available is v19.6.1:

    • ATWINC1510-MR210PB1961
    • ATWINC1510-MR210UB1961

    Looking for a chip level solution? Check out the IC solution here ATWINC1510-IC

    Subscribe to Welllinkchips !
    Your Name
    * Email
    Popular Posts
    Featured Parts More >
    Submit a request
    CONTACT US
    Company address

    WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK

    Send Enquiry
    SEND e-MAIL
    Office hour from 9am to 6pm ,
    Monday through Friday, UTC/GMT +8