0
OUTLINE
  • Introduction: Motion Sensing Tailored for the Body

  • Core Sensing Architecture and Signal Quality

  • Edge-AI and On-Sensor Intelligence

  • Application Fit and Development Path

  • Conclusion: The Right Sensor for the Body

Precision Motion for Wearables and Hearables: The BMI570 Inertial Measurement Unit

20 November 2026     By Ryan 2

Introduction: Motion Sensing Tailored for the Body

The distinction between an industrial motion sensor and one designed for wearable devices is not merely a matter of package size. Wearables and hearables operate under a unique set of constraints: they must capture subtle gestures and head movements with high fidelity, reject the vibrations of daily activity, and do so while consuming mere microwatts from a tiny battery. The BMI570 is Bosch Sensortec’s purpose-built answer to these constraints. As a member of the BMI5 platform introduced at CES 2026, it shares a common MEMS architecture with its siblings but is optimized specifically for activity tracking, context recognition, and spatial audio applications. This article provides an independent technical profile of the BMI570, examining its noise performance, its Edge-AI capabilities, and the design considerations that govern its integration into body-worn devices.

Core Sensing Architecture and Signal Quality

Low Noise and High Full-Scale Range

The BMI570 is built around a 16/24-bit accelerometer and a gyroscope with a full-scale range of ±4,000 dps and ±32 g—twice the range of the previous generation. This extended range ensures that even vigorous sporting movements do not saturate the sensor output, eliminating the clipping that can corrupt motion data during high-intensity activity. The noise density is specified at below 50 µg/√Hz for the accelerometer and below 0.003 °/s/√Hz for the gyroscope, figures that enable the detection of the smallest orientation changes required for precise head tracking and gesture recognition.

Vibration Robustness and Thermal Stability

A defining characteristic of the BMI5 platform is its resistance to thermo-mechanical stress and vibration. The BMI570 maintains reliable data acquisition across a vibration frequency range from 0 to 40 kHz and into the MHz range. For a hearable device, this robustness matters when the user is running, cycling, or operating in a vehicle: the sensor must distinguish intentional head motion from the broadband vibrations transmitted through the body and the device housing. The low offset drift over temperature—±0.07 mg/K for the accelerometer and ±0.003 °/s/K for the gyroscope—ensures that this performance remains stable across the operating temperature range of –40°C to +85°C.

Preliminary Technical Specifications

Parameter

BMI570 (Typical Values)

Package

2.5 × 3.0 × 0.75 mm³ LGA

Accelerometer Range

±2, ±4, ±8, ±16, ±32 g

Gyroscope Range

±125, ±250, ±500, ±1000, ±2000, ±4000 °/s

Accelerometer Resolution

16-bit & 24-bit

Accelerometer Noise

< 50 µg/√Hz (≤8 g); < 60 µg/√Hz (16 g)

Gyroscope Noise

< 0.003 °/s/√Hz

Output Data Rate (Accel)

1.56 Hz to 6.4 kHz

Output Data Rate (Gyro)

12.5 Hz to 12.8 kHz

Current (Max ODR)

650 µA

Current (100 Hz ODR)

250 µA

Suspend Current

3 µA

Supply Voltage (VDD)

1.71 V to 3.6 V

Supply Voltage (VDDIO)

1.08 V to 3.6 V

Operating Temperature

–40°C to +85°C

Edge-AI and On-Sensor Intelligence

Programmable Classification Engine

The BMI570 incorporates a programmable Edge-AI classification engine that analyzes motion patterns directly on the sensor. This architecture enables always-on functionality without waking the host processor for every motion event. In a hearable device, for example, the sensor can be programmed to recognize specific gestures—a double-tap on the earbud, a head nod, or a shake—and assert an interrupt only when the pattern is matched. The host remains in a low-power state until a meaningful event occurs, extending battery life while maintaining responsiveness.

Hearable-Optimized Feature Set

Bosch has tailored the BMI570’s feature set to the specific use cases of wearables and hearables. The integrated interrupt engine supports tap, double-tap, and triple-tap detection, along with step detection and an in-ear step counter. Tilt detection and any/no-motion interrupts are also available. These hardware features offload common wearable functions from the application processor, reducing system complexity and power consumption. For spatial audio, the sensor provides the head orientation data required for dynamic binaural rendering, with the low latency and timing resolution of the BMI5 platform ensuring that the audio image remains stable as the user moves.

Application Fit and Development Path

Target Applications and Design Rationale

The BMI570 is positioned for wearable devices, hearables, and smart accessories where motion sensing is a primary user-interface modality rather than an auxiliary function. Activity trackers benefit from the low-power step counting and context recognition capabilities. True wireless earbuds and headphones use the sensor for gesture control, in-ear detection, and spatial audio head tracking. Smartwatches leverage the combination of high-resolution motion data and on-sensor classification to deliver responsive raise-to-wake and workout tracking without draining the battery. In each case, the BMI570’s value lies in its ability to deliver precise motion data at power levels compatible with the smallest batteries.

Integration and Evaluation Notes

The BMI570 is scheduled for high-volume production from Q3 2026, with samples currently allocated to direct customers. Designers should note that the sensor’s 2.5 × 3.0 × 0.75 mm³ LGA package is designed for standard surface-mount assembly. The 8 KB on-chip FIFO buffer allows the host to batch-read sensor data at intervals, further reducing system power by minimizing bus transactions. Development support is available through Bosch Sensortec’s application engineering teams and the broader BMI5 ecosystem documentation. As with any always-on motion sensor, careful attention to interrupt configuration and FIFO watermark settings will determine the achievable system power consumption in the final product.

Conclusion: The Right Sensor for the Body

The BMI570 is not a general-purpose IMU adapted for wearables; it is a sensor designed from the ground up for the physical realities of body-worn devices. Its wide full-scale range accommodates sport, its low noise preserves subtle gestures, its vibration rejection handles the noise of movement, and its Edge-AI engine keeps the host asleep until it matters. For product teams building the next generation of hearables and wearables, the BMI570 offers a focused and well-integrated path to motion-aware functionality.

 


About Ryan

Ryan is an Electronic Engineer at Welllinkchips with 12+ years of industry experience. He writes clear, practical resources that help engineering and procurement teams evaluate component specifications, circuit performance, reliability, lifecycle risk, and supplier considerations.

His work is intended to support informed design and purchasing decisions for active, obsolete, and hard-to-source electronic components.

Areas of focus

· Electronic circuit design and component selection

· Obsolete and end-of-life component risk

· Supplier verification and counterfeit-risk reduction

· Component alternatives and BOM continuity

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request