0
OUTLINE
  • Introduction: The Multichannel Challenge

  • Multiplexer and Input Configuration

  • Integrated Features for System Simplification

  • Application Scenarios and Design Considerations

  • Conclusion: Density and Flexibility in a Compact Footprint

Eight Channels, One Package: The ADS8638SRGER for Multichannel Bipolar Acquisition

20 November 2026     By Ryan 1

Introduction: The Multichannel Challenge

Many real-world signals are bipolar in nature. Motor currents, vibration sensor outputs, and audio-band signals all swing above and below ground. Capturing these signals accurately with a single-supply ADC traditionally requires level-shifting circuitry and careful attention to headroom. The ADS8638SRGER takes a different approach: it is a 12-bit, 8-channel SAR ADC that directly accepts true bipolar inputs up to ±10 V, operating from a 5 V supply and fitting into a 4 mm × 4 mm QFN package . This article explores how the ADS8638SRGER addresses the specific needs of multichannel, bipolar signal acquisition, examining its multiplexer architecture, selectable ranges, and integration features that reduce external component count.

Multiplexer and Input Configuration

Eight Channels with Software-Selectable Ranges

The ADS8638SRGER integrates an 8:1 analog input multiplexer, allowing a single ADC core to sequentially sample eight separate signal sources . Each channel can be independently configured—through the SPI interface—to one of several input ranges. The selectable ranges include ±10 V, ±5 V, ±2.5 V, 0 V to 10 V, and 0 V to 5 V, with the capability to extend to ±12 V when using an external reference . This per-channel configurability is a powerful feature: a single device can monitor high-voltage actuator feedback on one channel, a low-level sensor on another, and a unipolar supply rail on a third, all without external signal conditioning.

True Bipolar Capability from a Single Supply

The ability to measure true bipolar signals (±10 V) while operating from a single 5 V analog supply is achieved through an internal charge pump and level-shifting architecture. This eliminates the need for a negative supply rail, which simplifies power supply design and reduces system cost. The input structure presents a single-ended measurement relative to the device ground, with the bipolar range centered around zero . For systems that already have a 5 V rail available, this feature alone can remove the complexity of generating and regulating a negative voltage.

Performance and Power Metrics

The ADS8638SRGER delivers 12-bit resolution with no missing codes and an integral nonlinearity (INL) of ±0.9 LSB . The signal-to-noise ratio is 71.8 dB, which is appropriate for a 12-bit converter and sufficient for most industrial control and monitoring applications. Power consumption is 14.45 mW at the full 1-MSPS throughput rate, dropping to 5.85 mW at 100 kSPS . The device also includes a flexible power-down mode that can be invoked between conversion bursts to conserve energy in duty-cycled systems.

Key Specifications at a Glance

Parameter

ADS8638SRGER

Resolution

12 bits

Sample Rate

1 MSPS

Number of Channels

8 (single-ended, multiplexed)

Input Ranges (selectable)

±10 V, ±5 V, ±2.5 V, 0–10 V, 0–5 V

Extended Range

Up to ±12 V with external reference

INL

±0.9 LSB

SNR

71.8 dB

Analog Supply

2.7 V to 5.25 V

Digital Supply

1.65 V to 5.25 V

Power at 1 MSPS

14.45 mW

Package

24-pin VQFN (4 mm × 4 mm)

Integrated Features for System Simplification

Internal Temperature Sensor and Reference

Beyond the multiplexer and ADC core, the ADS8638SRGER includes several auxiliary features that reduce external component count. An internal temperature sensor allows the system to monitor board or ambient temperature without an external thermistor or IC. An internal voltage reference is provided, though the device can also be operated with an external reference for applications requiring higher precision or a different full-scale value . These integrated functions are particularly valuable in compact, multichannel modules where every square millimeter of board space is contested.

Per-Channel Alarm Thresholds

The device includes a digital comparator feature that allows the user to set alarm thresholds for each input channel . When a conversion result falls outside the programmed high or low limit, the device can assert an alarm signal. This hardware-based monitoring frees the host processor from continuously polling all eight channels and enables rapid response to fault conditions. In motor control or power monitoring applications, this can be used to detect overcurrent or overvoltage events within a single conversion cycle.

Application Scenarios and Design Considerations

Target Applications

The combination of eight channels, true bipolar inputs, and a small footprint makes the ADS8638SRGER well-suited for industrial motor control, where it can simultaneously monitor phase currents, DC bus voltage, and temperature sensors. Power quality monitoring equipment benefits from the ability to measure multiple voltage and current phases with a single device. Automated test equipment (ATE) and multichannel data loggers also leverage the per-channel range programmability to adapt to different device-under-test requirements without hardware changes .

Development and Layout Guidance

When designing with the ADS8638SRGER, attention to layout is important to achieve the specified performance. The device’s 1-MSPS throughput and 12-bit resolution mean that digital switching noise can couple into the analog input paths if proper separation is not maintained. A solid ground plane, separate analog and digital routing, and careful placement of the input filter capacitors are recommended. The multiplexer’s charge injection during channel switching should be absorbed by a capacitor at the input pin, and the source impedance should be low enough to allow the input to settle within the acquisition time. TI’s evaluation module and reference layouts provide a proven starting point for these critical layout decisions.

Conclusion: Density and Flexibility in a Compact Footprint

The ADS8638SRGER demonstrates that high channel density and true bipolar measurement capability need not come in a large package or require complex external circuitry. By integrating an 8-channel multiplexer, selectable input ranges, a reference, and a temperature sensor into a 4 mm × 4 mm QFN, it enables compact multichannel data acquisition systems that can interface directly to industrial-grade bipolar signals. For designers facing the challenge of measuring multiple diverse signals in a space-constrained enclosure, this device offers a practical and well-integrated path from sensor to digital output.

 


About Ryan

Ryan is an Electronic Engineer at Welllinkchips with 12+ years of industry experience. He writes clear, practical resources that help engineering and procurement teams evaluate component specifications, circuit performance, reliability, lifecycle risk, and supplier considerations.

His work is intended to support informed design and purchasing decisions for active, obsolete, and hard-to-source electronic components.

Areas of focus

· Electronic circuit design and component selection

· Obsolete and end-of-life component risk

· Supplier verification and counterfeit-risk reduction

· Component alternatives and BOM continuity

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request