0
TS3A26746E
  • TS3A26746E
  • TS3A26746E

TS3A26746E

ACTIVE

80-mΩ, 3.3-V, 2 x 2 crosspoint switch for audio applications

Texas Instruments TS3A26746E Product Info

1 April 2026 4

Parameters

Configuration

Crosspoint/exchange

Number of channels

2

Protocols

Analog Audio

Ron (typ) (Ω)

0.08

Supply current (typ) (µA)

40

Operating temperature range (°C)

-40 to 85

Features

Manual Microphone Switch Control

Input/output continuous current (max) (A)

0.1

Rating

Catalog

Supply voltage (max) (V)

3.6

Package

DSBGA (YZP)-6-2.1875 mm² 1.75 x 1.25

Features

  • Ultra Low RON for GND Switch (80-mΩ typical)
  • RON for MIC Switch <10-Ω
  • 3.0V to 3.6V V+ Operation
  • Control Input is 1.8-V Logic Compatible
  • 6-bump, 0.5mm pitch CSP Package (1.45mm × 0.95mm × 0.5mm)
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2000-V Human-Body Model (A114-B, Class II)
    • 500-V Charged-Device Model (C101)
  • ESD Performance (SLEEVE, RING2)
    • ±8-kV Contact Discharge (IEC 61000-4-2)
  • Ultra Low RON for GND Switch (80-mΩ typical)
  • RON for MIC Switch <10-Ω
  • 3.0V to 3.6V V+ Operation
  • Control Input is 1.8-V Logic Compatible
  • 6-bump, 0.5mm pitch CSP Package (1.45mm × 0.95mm × 0.5mm)
  • Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II
  • ESD Performance Tested Per JESD 22
    • 2000-V Human-Body Model (A114-B, Class II)
    • 500-V Charged-Device Model (C101)
  • ESD Performance (SLEEVE, RING2)
    • ±8-kV Contact Discharge (IEC 61000-4-2)

Description

The TS3A26746E is a 2 × 2 cross-point switch that is used to interchange the Ground and MIC connections on a headphone connector. The Ground switch has an ultra low RON of <0.1Ω to minimize voltage drop across it, preventing undesired increases in headphone ground reference voltage. The switch state is controlled via the SEL input. When SEL=High, GND is connected to RING2 and MIC is connected to SLEEVE. When SEL=Low, GND is connected to SLEEVE and MIC is connected to RING2. An internal 100k pull-up resistor on the SEL input sets the default state of the switch.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request