0
TPSM8S6C24
  • TPSM8S6C24
  • TPSM8S6C24

TPSM8S6C24

ACTIVE

2.95V-to-16V input, 35A, 4x stackable PMBus® power module with extended security

Texas Instruments TPSM8S6C24 Product Info

1 April 2026 4

Parameters

Rating

Catalog

Topology

Buck

Iout (max) (A)

35

Vin (max) (V)

16

Vin (min) (V)

2.95

Vout (max) (V)

3.6

Vout (min) (V)

0.5

Features

Adjustable current limit, Current Sharing, Dynamic voltage scaling, EMI Tested, Enable, Frequency synchronization, Overcurrent protection, PMBus, Phase Interleaving, Power good, Remote Sense, Voltage Margining

Operating temperature range (°C)

-40 to 125

Type

Module

Duty cycle (max) (%)

85

Control mode

current mode

Switching frequency (min) (kHz)

275

Switching frequency (max) (kHz)

1100

Package

QFM (MOY)-45-176 mm² 16 x 11

Features

  • Integrated extended security feature
  • 4.25 V to 16 V with PVIN tied to AVIN with internal LDO
  • 2.95 V to 16 V with PVIN and AVIN split rail, or with external bias on VDD5
  • Integrated MOSFETs, inductors, and basic passives
  • Average current mode control with selectable internal compensation
  • 0.5-V to 3.6-V output voltage range from through pinstrap
  • 0.25-V to 3.6-VPMBus VOUT_COMMAND range
  • Extensive PMBus command set with telemetry for V OUT, I OUT, and die temperature
  • Differential remote sensing with an internal FB divider for < 1% V OUT error
  • –40°C to +125°C T J
  • AVS and margining capabilities through PMBus
  • Multi function select (MSEL) pins for pinstrap programming PMBus defaults
  • Nine selectable switching frequencies from 275 kHz to 1.1 MHz
  • Frequency sync in, sync out
  • Supports prebiased output
  • 16-mm × 11-mm × 4.3-mm, 45-pin MOY package
  • Create a custom design using the TPSM8S6C24 with the WEBENCH Power Designer
  • Integrated extended security feature
  • 4.25 V to 16 V with PVIN tied to AVIN with internal LDO
  • 2.95 V to 16 V with PVIN and AVIN split rail, or with external bias on VDD5
  • Integrated MOSFETs, inductors, and basic passives
  • Average current mode control with selectable internal compensation
  • 0.5-V to 3.6-V output voltage range from through pinstrap
  • 0.25-V to 3.6-VPMBus VOUT_COMMAND range
  • Extensive PMBus command set with telemetry for V OUT, I OUT, and die temperature
  • Differential remote sensing with an internal FB divider for < 1% V OUT error
  • –40°C to +125°C T J
  • AVS and margining capabilities through PMBus
  • Multi function select (MSEL) pins for pinstrap programming PMBus defaults
  • Nine selectable switching frequencies from 275 kHz to 1.1 MHz
  • Frequency sync in, sync out
  • Supports prebiased output
  • 16-mm × 11-mm × 4.3-mm, 45-pin MOY package
  • Create a custom design using the TPSM8S6C24 with the WEBENCH Power Designer

Description

TPSM8S6C24 is a highly integrated, easy-to-use, non-isolated DC/DC buck power module with added manufacturer-specific PMBus commands and the addition of EXTENDED_WRITE_PROTECT and PASSKEY improves security against malicious access to the PMBus by restricting Write capability with greater resolution than the standard Write Protect command.

TPSM8S6C24 is a 35-A power module and can source up to 140-A with 4 × stackability. The device has an option to overdrive the internal 5-V LDO with an external 5-V supply to enable lower input voltage range down to 2.95 V and improve the efficiency of the converter.

TPSM8S6C24 power module uses a proprietary fixed-frequency current-mode control with input feedforward and selectable internal compensation components for minimal size and stability over a wide range of output capacitances.

The PMBus interface with 1-MHz clock support to provide a convenient, standardized digital interface for converter configuration as well as monitoring of key parameters including output voltage, output current, and internal die temperature. Response to fault conditions can be set to restart, latch off, or ignore, depending on system requirements. Back-channel communication between stacked devices enables all TPSM8S6C24 converters, powering a single output rail to share a single address to simplify system software/firmware design. Key parameters including output voltage, switching frequency, soft-start time, and overcurrent fault limits can also be configured through BOM selection without PMBus communication to support program free power up.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request