0
TPSM82902
  • TPSM82902
  • TPSM82902

TPSM82902

ACTIVE

3-V to 17-V, 2-A high efficiency, low IQ synchronous buck converter module with integrated inductor

Texas Instruments TPSM82902 Product Info

1 April 2026 5

Parameters

Rating

Catalog

Topology

Buck, Synchronous Buck

Iout (max) (A)

2

Vin (max) (V)

17

Vin (min) (V)

3

Vout (max) (V)

5.5

Vout (min) (V)

0.4

Features

Enable, Light-load efficiency, Output discharge, Power good, Tracking

Operating temperature range (°C)

-40 to 125

Type

Module

Duty cycle (max) (%)

100

Control mode

DCS-Control

Switching frequency (min) (kHz)

1000

Switching frequency (max) (kHz)

2500

Package

uSIP (SIS)-11-8.4 mm² 3 x 2.8

Features

  • High efficiency for wide duty cycle and load range
    • IQ: 4-µA typical
    • 62-mΩ high-side and 22-mΩ low-side RDS(ON)
  • 3-mm × 2.8-mm × 1.6-mm MicroSiP™ package
  • Up to 2-A continuous output current
  • ±0.9% feedback voltage accuracy across temp (–40°C to 125°C)
  • Configurable output voltage options:
    • VFB external divider: 0.6 V to 5.5 V
    • VSET internal divider: 16 options between 0.4 V and 5.5 V
  • DCS-Control topology with 100% mode
  • Flexibility through MODE/S-CONF pin
    • 2.5-MHz or 1.0-MHz switching frequency
    • Forced PWM or auto (PFM) power save mode with dynamic mode change option
    • Automatic efficiency enhancement (AEE)
    • Output discharge on/off
  • Highly flexible and easy to use
    • Optimized pinout for single-layer routing
    • Precise enable input
    • Power-good output
    • Adjustable soft start and tracking
  • No external bootstrap capacitor required
  • Create a custom design using the TPSM82902 using the WEBENCH Power Designer
  • High efficiency for wide duty cycle and load range
    • IQ: 4-µA typical
    • 62-mΩ high-side and 22-mΩ low-side RDS(ON)
  • 3-mm × 2.8-mm × 1.6-mm MicroSiP™ package
  • Up to 2-A continuous output current
  • ±0.9% feedback voltage accuracy across temp (–40°C to 125°C)
  • Configurable output voltage options:
    • VFB external divider: 0.6 V to 5.5 V
    • VSET internal divider: 16 options between 0.4 V and 5.5 V
  • DCS-Control topology with 100% mode
  • Flexibility through MODE/S-CONF pin
    • 2.5-MHz or 1.0-MHz switching frequency
    • Forced PWM or auto (PFM) power save mode with dynamic mode change option
    • Automatic efficiency enhancement (AEE)
    • Output discharge on/off
  • Highly flexible and easy to use
    • Optimized pinout for single-layer routing
    • Precise enable input
    • Power-good output
    • Adjustable soft start and tracking
  • No external bootstrap capacitor required
  • Create a custom design using the TPSM82902 using the WEBENCH Power Designer

Description

The TPSM82902 is a highly efficient, small, and flexible synchronous step-down DC-DC converter MicroSiP package module that is easy to use. A selectable switching frequency of 2.5 MHz or 1.0 MHz allows the use of small components and provides fast transient response. The device supports high VOUT accuracy of ± 1% with the DCS-Control topology. The wide input voltage range of 3 V to 17 V supports a variety of nominal inputs, like 12-V supply rails, single-cell or multi-cell Li-Ion, and 5-V or 3.3-V rails.

The TPSM82902 can automatically enter power save mode (if auto PFM/PWM is selected) at light loads to maintain high efficiency. Additionally, to provide high efficiency at very small loads, the device has a low typical quiescent current of 4 µA. AEE, if enabled, provides high efficiency across VIN, VOUT, and load current. The device includes a MODE/Smart-CONF input to set the internal/external divider, switching frequency, output voltage discharge, and automatic power save mode or forced PWM operation.

The device is available in small 11-pin MicroSiP package measuring 3.0 mm × 2.8 mm × 1.6 mm with an integrated 1-µH inductor.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request