0
TPS7H2221-SEP
  • TPS7H2221-SEP
  • TPS7H2221-SEP
  • TPS7H2221-SEP

TPS7H2221-SEP

ACTIVE

Radiation-tolerant 1.6-V to 5.5-V input 1.25-A load switch

Texas Instruments TPS7H2221-SEP Product Info

1 April 2026 4

Parameters

Imax (A)

1.25

Vin (max) (V)

5.5

Vin (min) (V)

1.6

Number of channels

1

Features

Inrush current control, Quick output discharge, Short circuit protection, Thermal shutdown

Quiescent current (Iq) (typ) (µA)

8

Soft start

Fixed Rise Time

Rating

Space

Ron (typ) (mΩ)

115

Shutdown current (ISD) (typ) (µA)

0.003

Current limit type

Fixed

Function

Inrush current control, Short circuit protection, Thermal shutdown

FET

Internal

Operating temperature range (°C)

-55 to 125

Device type

Load switch

Package

SOT-SC70 (DCK)-6-4.2 mm² 2 x 2.1

Features

  • Vendor item drawing available, VID V62/22609
  • Total ionizing dose (TID) characterized to 30 krad(Si)
    • TID RLAT (radiation lot acceptance testing) for every wafer lot to 20 krad(Si)
  • Single-event effects (SEE) characterized
    • Single-event latch-up (SEL), single-event burnout (SEB) and single-event gate rupture (SEGR) immune to effective linear energy transfer (LETEFF) of 43 MeV– cm2/mg.
    • Single-event transient (SET) and single-event functional interrupt (SEFI) characterized to LETEFF of 43 MeV– cm2/mg.
  • Input operating voltage range (VIN): 1.6 to 5.5 V
  • Recommended continuous current (IMAX): 1.25 A
  • On-resistance (RON):
    • 116 mΩ (typ.) at VIN = 5 V
    • 115 mΩ (typ.) at VIN = 3.3 V
    • 133 mΩ (typ.) at VIN = 1.8 V
  • Output short protection (ISC): 3 A (typ.)
  • Low power consumption:
    • ON state (IQ): 8.3 µA (typ.)
    • OFF state (ISD): 3 nA (typ.)
  • Slow turn ON timing to limit inrush current (tON):
    • tON at 5 V = 1.68 ms at 3.61 mV/µs
    • tON at 3.3 V = 1.51 ms at 2.91 mV/µs
    • tON at 1.8 V = 1.32 ms at 2.15 mV/µs
  • Adjustable output discharge and fall time:
    • Internal QOD resistance = 9.2 Ω (typ.) at VIN = 3.3 V
  • Space Enhanced Plastic (SEP)
    • Controlled baseline
    • Gold bondwire
    • NiPdAu lead finish
    • One assembly and test site
    • One fabrication site
    • Military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification (PCN)
    • Product traceability
    • Enhance mold compound for low outgassing
  • Vendor item drawing available, VID V62/22609
  • Total ionizing dose (TID) characterized to 30 krad(Si)
    • TID RLAT (radiation lot acceptance testing) for every wafer lot to 20 krad(Si)
  • Single-event effects (SEE) characterized
    • Single-event latch-up (SEL), single-event burnout (SEB) and single-event gate rupture (SEGR) immune to effective linear energy transfer (LETEFF) of 43 MeV– cm2/mg.
    • Single-event transient (SET) and single-event functional interrupt (SEFI) characterized to LETEFF of 43 MeV– cm2/mg.
  • Input operating voltage range (VIN): 1.6 to 5.5 V
  • Recommended continuous current (IMAX): 1.25 A
  • On-resistance (RON):
    • 116 mΩ (typ.) at VIN = 5 V
    • 115 mΩ (typ.) at VIN = 3.3 V
    • 133 mΩ (typ.) at VIN = 1.8 V
  • Output short protection (ISC): 3 A (typ.)
  • Low power consumption:
    • ON state (IQ): 8.3 µA (typ.)
    • OFF state (ISD): 3 nA (typ.)
  • Slow turn ON timing to limit inrush current (tON):
    • tON at 5 V = 1.68 ms at 3.61 mV/µs
    • tON at 3.3 V = 1.51 ms at 2.91 mV/µs
    • tON at 1.8 V = 1.32 ms at 2.15 mV/µs
  • Adjustable output discharge and fall time:
    • Internal QOD resistance = 9.2 Ω (typ.) at VIN = 3.3 V
  • Space Enhanced Plastic (SEP)
    • Controlled baseline
    • Gold bondwire
    • NiPdAu lead finish
    • One assembly and test site
    • One fabrication site
    • Military (–55°C to 125°C) temperature range
    • Extended product life cycle
    • Extended product-change notification (PCN)
    • Product traceability
    • Enhance mold compound for low outgassing

Description

The TPS7H2221-SEP device is a small, single channel load switch with controlled slew rate. The device contains an N-channel MOSFET that can operate over an input voltage range of 1.6 V to 5.5 V and can support a maximum continuous current of 1.25 A.

The switch ON state is controlled by a digital input that is capable of interfacing directly with low-voltage control signals. When power is first applied, a Smart Pull Down is used to keep the ON pin from floating until system sequencing is complete. Once the pin is deliberately driven high (VON>VIH), the Smart Pull Down will be disconnected to prevent unnecessary power loss.

The TPS7H2221-SEP load switch is also self-protected, meaning that it protects against short circuit events on the output of the device.

The TPS7H2221-SEP is available in a standard SC-70 package characterized for operation over an ambient temperature range of –55°C to 125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request