0
TPS7B81-Q1
  • TPS7B81-Q1
  • TPS7B81-Q1
  • TPS7B81-Q1
  • TPS7B81-Q1
  • TPS7B81-Q1

TPS7B81-Q1

ACTIVE

Automotive 150-mA, off-battery (40-V), ultra-low-IQ, low-dropout voltage regulator with enable

Texas Instruments TPS7B81-Q1 Product Info

1 April 2026 6

Parameters

Rating

Automotive

Vin (max) (V)

40

Vin (min) (V)

3

Iout (max) (A)

0.15

Output options

Fixed Output

Vout (max) (V)

3.3, 5

Vout (min) (V)

3.3

Fixed output options (V)

2.5, 3.3, 5

Noise (µVrms)

450

PSRR at 100 KHz (dB)

60

Iq (typ) (mA)

0.0027

Features

Enable

Thermal resistance θJA (°C/W)

31.1, 63.9, 72.8

TI functional safety category

Functional Safety-Capable

Load capacitance (min) (µF)

1

Regulated outputs (#)

1

Accuracy (%)

1.5

Dropout voltage (Vdo) (typ) (mV)

270

Operating temperature range (°C)

-40 to 150

Package

HVSSOP (DGN)-8-14.7 mm² 3 x 4.9

Features

  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
    • Temperature grade 1: –40°C to +150°C, TJ
  • 3V to 40V wide VIN input voltage range with up to 45V transient
  • Maximum output current: 150mA
  • Low quiescent current IQ:
    • 300nA typical when EN = low (shutdown mode)
    • 2.7µA typical at light loads
    • 4.5µA maximum at light loads
  • 1.5% output-voltage accuracy over line, load and temperature
  • Maximum dropout voltage: 540mV at 150mA load current for fixed 5V output version
  • Stable with low-ESR (0.001Ω to 5Ω) ceramic output-stability capacitor (1µF to 200µF)
  • Fixed output voltage: 5V, 3.3V, and 2.5V
  • Integrated fault protection:
    • Thermal shutdown
    • Short-circuit and overcurrent protection
  • Functional Safety-Capable
  • Packages:
    • DGN (8-pin HVSSOP), RθJA = 63.9°C/W
    • DRV (6-pin WSON), RθJA = 72.8°C/W
    • DRV (6-pin WSON wettable flank), RθJA = 72.8°C/W
    • KVU (5-pin TO-252), RθJA = 38.8°C/W
  • AEC-Q100 qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
    • Temperature grade 1: –40°C to +150°C, TJ
  • 3V to 40V wide VIN input voltage range with up to 45V transient
  • Maximum output current: 150mA
  • Low quiescent current IQ:
    • 300nA typical when EN = low (shutdown mode)
    • 2.7µA typical at light loads
    • 4.5µA maximum at light loads
  • 1.5% output-voltage accuracy over line, load and temperature
  • Maximum dropout voltage: 540mV at 150mA load current for fixed 5V output version
  • Stable with low-ESR (0.001Ω to 5Ω) ceramic output-stability capacitor (1µF to 200µF)
  • Fixed output voltage: 5V, 3.3V, and 2.5V
  • Integrated fault protection:
    • Thermal shutdown
    • Short-circuit and overcurrent protection
  • Functional Safety-Capable
  • Packages:
    • DGN (8-pin HVSSOP), RθJA = 63.9°C/W
    • DRV (6-pin WSON), RθJA = 72.8°C/W
    • DRV (6-pin WSON wettable flank), RθJA = 72.8°C/W
    • KVU (5-pin TO-252), RθJA = 38.8°C/W

Description

In automotive battery-connected applications, low quiescent current (IQ) is important to conserve energy and to extend battery lifetime. Always-on systems must have ultra-low IQ over an extended temperature range to enable sustained operation when the vehicle ignition is off.

The TPS7B81-Q1 is a low-dropout (LDO) linear regulator designed for up to 40V VIN applications. With only a 2.7µA typical quiescent current at light load, the device is an optimum design for powering microcontrollers and controller area network and local interconnect network (CAN/LIN) transceivers in standby systems.

The device features integrated short-circuit and overcurrent protection. This device operates in ambient temperatures from –40°C to +125°C and with junction temperatures from –40°C to +150°C. Additionally, this device is available in several packages of varying size and thermal conductivity. The compact WSON package comes in a wettable flank option. The TO-252 package enables sustained operation despite significant dissipation across the device. These features make the device well suited as a power supply for various battery-connected automotive applications.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request