0
TPS61022
  • TPS61022
  • TPS61022

TPS61022

ACTIVE

8-A boost converter with 0.5-V ultra-low input voltage

Texas Instruments TPS61022 Product Info

1 April 2026 16

Parameters

Rating

Catalog

Topology

Boost

Vin (max) (V)

5.5

Vin (min) (V)

0.5

Vout (max) (V)

5.5

Vout (min) (V)

2.2

Switch current limit (typ) (A)

8

Features

Enable, Light-load efficiency, Load Disconnect, Pass-through mode, Prebias startup, Synchronous rectification, UVLO fixed

Operating temperature range (°C)

-40 to 125

Iq (typ) (A)

0.000027

Duty cycle (max) (%)

97

Package

VQFN-HR (RWU)-7-4 mm² 2 x 2

Features

  • Input voltage range: 0.5 V to 5.5 V
  • 1.8-V minimum input voltage for start-up
  • Output voltage setting range: 2.2 V to 5.5 V
  • Two 12-mΩ (LS) / 18-mΩ (HS) MOSFETs
  • 8-A valley switching current limit
  • 94.7% efficiency at VIN = 3.6 V, VOUT = 5 V and IOUT = 3 A
  • 1-MHz switching frequency when VIN > 1.5 V and 0.6-MHz switching frequency when VIN < 1 V
  • ±2.5% reference voltage accuracy over –40°C to +125°C
  • Pin-selectable auto PFM operation mode or forced PWM operation mode at light load
  • Pass-through mode when VIN > VOUT
  • True disconnection between input and output during shutdown
  • Output overvoltage and thermal shutdown protections
  • Output short-circuit protection
  • 2-mm × 2-mm VQFN 7-pin package
  • Input voltage range: 0.5 V to 5.5 V
  • 1.8-V minimum input voltage for start-up
  • Output voltage setting range: 2.2 V to 5.5 V
  • Two 12-mΩ (LS) / 18-mΩ (HS) MOSFETs
  • 8-A valley switching current limit
  • 94.7% efficiency at VIN = 3.6 V, VOUT = 5 V and IOUT = 3 A
  • 1-MHz switching frequency when VIN > 1.5 V and 0.6-MHz switching frequency when VIN < 1 V
  • ±2.5% reference voltage accuracy over –40°C to +125°C
  • Pin-selectable auto PFM operation mode or forced PWM operation mode at light load
  • Pass-through mode when VIN > VOUT
  • True disconnection between input and output during shutdown
  • Output overvoltage and thermal shutdown protections
  • Output short-circuit protection
  • 2-mm × 2-mm VQFN 7-pin package

Description

The TPS61022 provides a power supply solution for portable equipment and IoT devices powered by various batteries and super capacitors. The TPS61022 has minimum 6.5-A valley switch current limit over full temperature range. With a wide input voltage range of 0.5 V to 5.5 V, the TPS61022 supports supercapacitor backup power applications, which may deeply discharge the supercapacitor.

The TPS61022 operates at 1-MHz switching frequency when the input voltage is above 1.5 V. the switching frequency decreases gradually to 0.6 MHz when the input voltage is below 1.5 V down to 1 V. A MODE pin sets the TPS61022 operating either in power-save mode or forced PWM mode in light load condition. The TPS61022 only consumes a 26-µA quiescent current from VOUT in light load condition. During shutdown, the load is completely disconnected from the input power. The TPS61022 has 5.7-V output overvoltage protection, output short-circuit protection, and thermal shutdown protection.

The TPS61022 offers a very small solution size with its 2-mm × 2-mm VQFN package and minimum amount of external components.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request