0
TPS27SA08
  • TPS27SA08
  • TPS27SA08

TPS27SA08

ACTIVE

36-V, 8-mΩ, 10-A, 1-ch, Industrial high-side switch with current sense

Texas Instruments TPS27SA08 Product Info

1 April 2026 7

Parameters

Number of channels

1

Rating

Catalog

Operating voltage (max) (V)

36

Operating voltage (min) (V)

8

Ron (typ) (mΩ)

9

Imax (A)

10

Current limit (max) (A)

20

Current limit (min) (A)

20

Current limit type

Fixed

FET

Internal

Features

Current sense output, Current sense/monitor, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out

TI functional safety category

Functional Safety-Capable

Current limit accuracy

+25/-25%

Current sense accuracy

+5/-5% @ 0.78A

Operating temperature range (°C)

-40 to 125

Function

Adjustable current limit, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown

Package

HTSSOP (PWP)-16-32 mm² 5 x 6.4

Features

  • Single-channel smart high-side switch with a typical 9-mΩ RON (TJ = 25°C)
  • Improve reliability through overcurrent protection:
    • Current limit threshold nominally at 20 A
    • Current limiting (clamping) on reaching the threshold
  • Robust integrated output protection:
    • Integrated thermal protection
    • Protection against short to ground and supply
    • Automatic FET switch-on during reverse supply
    • Automatic shut off if loss of supply and ground occurs
    • Integrated output clamp to demagnetize inductive loads
    • Configurable fault handling
  • Analog sense output can be configured to accurately measure:
    • Load current
    • Supply voltage
    • Device temperature
  • Provides FLT indication back to MCU
    • Detection of open load in off-state and short-to-GND
  • Single-channel smart high-side switch with a typical 9-mΩ RON (TJ = 25°C)
  • Improve reliability through overcurrent protection:
    • Current limit threshold nominally at 20 A
    • Current limiting (clamping) on reaching the threshold
  • Robust integrated output protection:
    • Integrated thermal protection
    • Protection against short to ground and supply
    • Automatic FET switch-on during reverse supply
    • Automatic shut off if loss of supply and ground occurs
    • Integrated output clamp to demagnetize inductive loads
    • Configurable fault handling
  • Analog sense output can be configured to accurately measure:
    • Load current
    • Supply voltage
    • Device temperature
  • Provides FLT indication back to MCU
    • Detection of open load in off-state and short-to-GND

Description

The TPS27SA08 device is a single-channel smart high-side switch intended for use with 24-V supply systems. The device integrates robust protection and diagnostic features to ensure output port protection even during harmful events like short circuits. The device protects against faults through a reliable current limit, which, depending on device variant, can be configured to react to an overcurrent event by either instantly turning the switch off or by regulating the output current at the set point (nominally 20 A). The TPS27SA08 device also provides a high accuracy analog current sense that allows for improved diagnostics when driving varied load profiles. By reporting load current, device temperature, and supply voltage to a system MCU, the device enables predictive maintenance and load diagnostics that lengthen the system lifetime.

The TPS27SA08 device is available in a small 16-pin HTSSOP package which allows for reduced PCB footprint.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request