0
TPS2291L02
  • TPS2291L02

TPS2291L02

ACTIVE

5.5V, 2A, 22mΩ load switch with 90nA IQ and quick output discharge

Texas Instruments TPS2291L02 Product Info

1 April 2026 3

Parameters

Imax (A)

2

Vin (max) (V)

5.5

Vin (min) (V)

1.05

Number of channels

1

Features

Inrush current control, Quick output discharge

Quiescent current (Iq) (typ) (µA)

0.09

Soft start

Fixed Rise Time

Rating

Catalog

Ron (typ) (mΩ)

22

Shutdown current (ISD) (typ) (µA)

0.0016

Current limit type

None

FET

Internal

Operating temperature range (°C)

-40 to 105

Device type

Load switches

Package

DSBGA (YCJ)-4-0.374544 mm² 0.612 x 0.612

Features

  • Integrated Single Channel Load Switch
  • Input operating voltage range (VIN): 1.05V – 5.5V
  • Low On-Resistance (RON)
    • RON = 18.6mΩ (Typ) at VIN ≥ 3.3V
    • RON = 20.1mΩ (Typ) at VIN = 1.8V
    • RON = 23.3mΩ (Typ) at VIN = 1.05V
  • Low power consumption:
    • ON state (IQ): 90nA (typ.)
    • OFF state (ISD): 1.6nA (typ.)
  • Maximum continuous current: 2A
  • Controlled Turn on time of 130µs
  • Quick Output Discharge (QOD): 235Ω (typ.)
  • Thermal shutdown for self protection
  • Smart EN pin pulldown (RPD,EN):
    • EN ≥ VIH (ION): 25nA (max.)
    • EN ≤ VIL (RPD,ON): 530kΩ (typ)
  • Ultra small Wafer Chip Scale Package
    • 0.616mm × 0.616mm , 0.35mm pitch, 0.35mm Height DSBGA(YCJ)
  • ESD performance tested per JESD 22
    • 2kV HBM and 1kV CDM
  • Integrated Single Channel Load Switch
  • Input operating voltage range (VIN): 1.05V – 5.5V
  • Low On-Resistance (RON)
    • RON = 18.6mΩ (Typ) at VIN ≥ 3.3V
    • RON = 20.1mΩ (Typ) at VIN = 1.8V
    • RON = 23.3mΩ (Typ) at VIN = 1.05V
  • Low power consumption:
    • ON state (IQ): 90nA (typ.)
    • OFF state (ISD): 1.6nA (typ.)
  • Maximum continuous current: 2A
  • Controlled Turn on time of 130µs
  • Quick Output Discharge (QOD): 235Ω (typ.)
  • Thermal shutdown for self protection
  • Smart EN pin pulldown (RPD,EN):
    • EN ≥ VIH (ION): 25nA (max.)
    • EN ≤ VIL (RPD,ON): 530kΩ (typ)
  • Ultra small Wafer Chip Scale Package
    • 0.616mm × 0.616mm , 0.35mm pitch, 0.35mm Height DSBGA(YCJ)
  • ESD performance tested per JESD 22
    • 2kV HBM and 1kV CDM

Description

The EN pin controls the state of the switch. The EN pin is compatible with standard GPIO logic threshold so the device can be used in a wide variety of applications. When power is first applied to VIN, a Smart Pulldown is used to keep the EN pin from floating until the system sequencing is complete. After the EN pin is deliberately driven high (≥ VIH), the Smart Pulldown is disconnected to prevent unnecessary power loss. See the below table when the EN Pin Smart Pulldown is active.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request