0
TPS1HC30-Q1
  • TPS1HC30-Q1
  • TPS1HC30-Q1
  • TPS1HC30-Q1
  • TPS1HC30-Q1
  • TPS1HC30-Q1

TPS1HC30-Q1

ACTIVE

Automotive, 30-mΩ, 5-A single-channel smart high-side switch

Texas Instruments TPS1HC30-Q1 Product Info

1 April 2026 3

Parameters

Number of channels

1

Rating

Automotive

Operating voltage (max) (V)

28

Operating voltage (min) (V)

3

Ron (typ) (mΩ)

30

Imax (A)

5

Current limit (max) (A)

12

Current limit (min) (A)

1.2

Current limit type

Adjustable

FET

Internal

Features

Adjustable current limit, Automotive load dump, Current sense output, Fault reporting, Inductive load, Inrush current control, Short circuit protection, Thermal shutdown, Under voltage lock out

TI functional safety category

Functional Safety-Capable

Current limit accuracy

+/-18% @ 3.6A

Current sense accuracy

+6/-6% @ 1.5A

Operating temperature range (°C)

-40 to 125

Function

Adjustable current limit, Automotive load dump compatibility, Current monitoring, Inductive load compatibility, Inrush current control, Short circuit protection, Thermal shutdown

Package

HTSSOP (PWP)-14-32 mm² 5 x 6.4

Features

  • Single-channel, smart automotive, high side power switch with full diagnostics
    • Open-drain status output
    • Current sense analog output
  • Wide operating voltage 3 V to 28 V
  • Low standby current, 2.5 µA at 85°C
  • Operating junction temperature, –40 to 150°C
  • 1.8-V, 3.3-V and 5-V logic compatible
  • Fault sense voltage scaling for ADC protection
  • Programmable current limit and accuracy ±15% at 3.5 A
  • High-accuracy current sense, ±6% at 1 A
  • Protection
    • Overload and short-circuit protection
    • Inductive load negative voltage clamp
    • Undervoltage Lockout (UVLO) protection
    • Thermal shutdown and swing with self recovery
    • Loss of GND, loss of supply protection
    • Reverse battery protection
  • Diagnostic
    • On-state and Off-state output open-load and short-to-battery detection
    • Overload and short to ground detection
    • Thermal shutdown and swing detection
  • Qualifications
    • AEC-Q100 qualified for automotive applications:
      • Temperature grade 1: –40°C to +125°C, TA
    • Electrical transient disturbance immunity certification of ISO7637-2 and ISO16750-2
  • 14-pin, thermally-enhanced PWP package
  • Single-channel, smart automotive, high side power switch with full diagnostics
    • Open-drain status output
    • Current sense analog output
  • Wide operating voltage 3 V to 28 V
  • Low standby current, 2.5 µA at 85°C
  • Operating junction temperature, –40 to 150°C
  • 1.8-V, 3.3-V and 5-V logic compatible
  • Fault sense voltage scaling for ADC protection
  • Programmable current limit and accuracy ±15% at 3.5 A
  • High-accuracy current sense, ±6% at 1 A
  • Protection
    • Overload and short-circuit protection
    • Inductive load negative voltage clamp
    • Undervoltage Lockout (UVLO) protection
    • Thermal shutdown and swing with self recovery
    • Loss of GND, loss of supply protection
    • Reverse battery protection
  • Diagnostic
    • On-state and Off-state output open-load and short-to-battery detection
    • Overload and short to ground detection
    • Thermal shutdown and swing detection
  • Qualifications
    • AEC-Q100 qualified for automotive applications:
      • Temperature grade 1: –40°C to +125°C, TA
    • Electrical transient disturbance immunity certification of ISO7637-2 and ISO16750-2
  • 14-pin, thermally-enhanced PWP package

Description

The TPS1HC30-Q1 device is a fully protected, high-side power switch with integrated NMOS power FET and charge pump, targeted for the intelligent control of the variable kinds of loads. Accurate current sense and programmable current limit features differentiate the device from the market.

Low-logic, high-threshold, VIH, of 1.5 V on the input pins allow use of MCUs down to 1.8 V. High-accuracy current sensing allows a better real-time monitoring effect and more accurate diagnostics without further calibration. The external high-accuracy current limit allows setting the current limit value by application. The device highly improves the reliability of the system by clamping the inrush current effectively under start-up or short-circuit conditions. The TPS1HC30-Q1 device can be used as a high-side power switch for a wide variety of resistive, inductive, and capacitive loads, including the low-wattage bulbs, LEDs, relays, solenoids, and heaters.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request