0
TPA6138A2
  • TPA6138A2
  • TPA6138A2

TPA6138A2

ACTIVE

40-mW, stereo, analog input headphone amplifier with adjustable gain

Texas Instruments TPA6138A2 Product Info

1 April 2026 12

Parameters

Supply voltage (max) (V)

3.6

Supply voltage (min) (V)

3

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Package

TSSOP (PW)-14-32 mm² 5 x 6.4

Features

  • Stereo DirectPath™ Headphone Amplifier
    • 40 mW Into 32 Ω With 3.3-V Supply
  • Low THD+N < 0.01% at 10 mW Into 32 Ω
  • High SNR, >90 dB
  • Differential Input and Single-Ended Output
  • Adjustable Gain by External Gain-Setting
    Resistors
  • Configurable as a Second-Order Low-Pass Filter
    • Ideal for PWM Audio Sources
  • Low DC Offset, <1 mV
  • Ground-Referenced Outputs Eliminate DC-
    Blocking Capacitors
    • Reduce Board Area
    • Reduce Component Cost
    • Improve THD+N Performance
    • No Degradation of Low-Frequency Response
      Due to Output Capacitors
  • Short-Circuit Protection
  • Click- and Pop-Reduction Circuitry
  • External Undervoltage Mute
  • Active Mute Control for Pop-Free Audio On/Off
    Control
  • Space-Saving TSSOP Package
  • Stereo DirectPath™ Headphone Amplifier
    • 40 mW Into 32 Ω With 3.3-V Supply
  • Low THD+N < 0.01% at 10 mW Into 32 Ω
  • High SNR, >90 dB
  • Differential Input and Single-Ended Output
  • Adjustable Gain by External Gain-Setting
    Resistors
  • Configurable as a Second-Order Low-Pass Filter
    • Ideal for PWM Audio Sources
  • Low DC Offset, <1 mV
  • Ground-Referenced Outputs Eliminate DC-
    Blocking Capacitors
    • Reduce Board Area
    • Reduce Component Cost
    • Improve THD+N Performance
    • No Degradation of Low-Frequency Response
      Due to Output Capacitors
  • Short-Circuit Protection
  • Click- and Pop-Reduction Circuitry
  • External Undervoltage Mute
  • Active Mute Control for Pop-Free Audio On/Off
    Control
  • Space-Saving TSSOP Package

Description

The TPA6138A2 is a pop-free stereo headphone amplifier designed to allow the removal of the output dc-blocking capacitors for reduced component count and cost. The device is ideal for single-supply electronics where size and cost are critical design parameters.

Designed using TI’s patented DirectPath™ technology, The TPA6138A2 is capable of driving 25 mW into a 32-Ω load with 3.3-V supply voltage. The device has differential inputs and uses external gain-setting resistors that supports a gain range of ±1 V/V to ±10 V/V. Gain can be configured individually for each channel. The device can also be configured as a second-order low-pass filter and is ideal for interfacing with PWM audio sources. Audio output compiles with ±8-kV IEC ESD protection, requiring just a simple resistor-capacitor ESD protection circuit. The TPA6138A2 has built-in active-mute control for pop-free audio on/off control. The TPA6138A2 has an external undervoltage detector that mutes the output when the power supply is removed, ensuring a pop-free shutdown.

Using the TPA6138A2 in audio products can reduce component count considerably compared to traditional headphone amplifiers. The TPA6138A2 does not require a split-rail power supply or a dc blocking capacitor. The TPA6138A2 integrates its own charge pump to generate a negative supply rail that provides a clean, pop-free ground-biased audio signal.

The TPA6138A2 is available in a 14-pin TSSOP.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request