0
TPA3223
  • TPA3223
  • TPA3223
  • TPA3223
  • TPA3223

TPA3223

ACTIVE

200-W stereo, 400-W mono, 10 to 45-V supply, analog input class-D audio amplifier with low-idle

Texas Instruments TPA3223 Product Info

1 April 2026 17

Parameters

Audio input type

Analog Input

Architecture

Class-D

Speaker channels (max)

Stereo

Control interface

Hardware

Output power (W)

200

Power stage supply (max) (V)

45

Power stage supply (min) (V)

10

RDS(on) (Ω)

0.06

THD + N at 1 kHz (%)

0.02

Load (min) (Ω)

1

Rating

Catalog

Operating temperature range (°C)

-40 to 85

Package

HTSSOP (DDV)-44-113.4 mm² 14 x 8.1

Features

  • Wide 10-V to 42-V Supply Voltage Range
  • Stereo (2 x BTL) and mono (1 x PBTL) configurations
  • Output Power at 10% THD+N
    • 200-W Stereo into 4 Ω in BTL Configuration
    • 300-W Mono into 3 Ω in PBTL Configuration
    • 425W Mono into 2 Ω in PBTL Configuration
  • Output Power at 1% THD+N
    • 170-W Stereo into 4 Ω in BTL Configuration
    • 325-W Mono into 2 Ω in PBTL Configuration
  • Closed-loop feedback design
    • <0.02% THD+N at 1 W into 4 Ω
    • 60-dB PSRR (BTL, No input signal)
    • <100-µV output noise (A-weighted)
    • >110-dB SNR (A-weighted)
  • Low-Power operating modes
    • Standby modes: mute and shutdown
    • Single-channel BTL operation
  • Multiple input options to simplify pre-amp design
    • Differential or single-ended analog inputs
    • Selectable Gains: 20 dB, 23.5 dB, 32 dB, 36 dB
  • Integrated Protection: Undervoltage, Overvoltage, Overcurrent, Cycle-by-cycle Current Limit, Short Circuit, Clipping Detection, Overtemperature Warning and Shutdown, and DC Speaker Protection
  • Easily synchronize muliples devices
  • 90% Efficient Class-D Operation (4 Ω)
  • Wide 10-V to 42-V Supply Voltage Range
  • Stereo (2 x BTL) and mono (1 x PBTL) configurations
  • Output Power at 10% THD+N
    • 200-W Stereo into 4 Ω in BTL Configuration
    • 300-W Mono into 3 Ω in PBTL Configuration
    • 425W Mono into 2 Ω in PBTL Configuration
  • Output Power at 1% THD+N
    • 170-W Stereo into 4 Ω in BTL Configuration
    • 325-W Mono into 2 Ω in PBTL Configuration
  • Closed-loop feedback design
    • <0.02% THD+N at 1 W into 4 Ω
    • 60-dB PSRR (BTL, No input signal)
    • <100-µV output noise (A-weighted)
    • >110-dB SNR (A-weighted)
  • Low-Power operating modes
    • Standby modes: mute and shutdown
    • Single-channel BTL operation
  • Multiple input options to simplify pre-amp design
    • Differential or single-ended analog inputs
    • Selectable Gains: 20 dB, 23.5 dB, 32 dB, 36 dB
  • Integrated Protection: Undervoltage, Overvoltage, Overcurrent, Cycle-by-cycle Current Limit, Short Circuit, Clipping Detection, Overtemperature Warning and Shutdown, and DC Speaker Protection
  • Easily synchronize muliples devices
  • 90% Efficient Class-D Operation (4 Ω)

Description

TPA3223 is a high-power Class-D amplifier that enables efficient operation at full-power, idle and standby. The device features closed-loop feedback which provides low distortion across the audio band and delivers excellent sound quality. The device operates in AD modulation and can drive up to 2 x 200 W into 4-Ω load or 1 x 400 W into 2-Ω load.

The TPA3223 features a single-ended or differential analog-input interface that supports up to 2 VRMS with four selectable gains: 20 dB, 23.5 dB, 32 dB and 36 dB. The TPA3223 also achieves >90% efficiency, low idle power and ultra-low standby power (<0.1 W). This is made possible through the use of 60-mΩ MOSFETs, an optimized gate drive scheme and low-power operating modes. To further simplify the design, the device integrates essential protection features including undervoltage, overvoltage, cycle-by-cycle current limit, short circuit, clipping detection, overtemperature warning and shutdown, and DC speaker protection.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request