Product
0
TMAG5230
  • TMAG5230
  • TMAG5230

TMAG5230

ACTIVE

High-performance small-size (WCSP) Hall-effect switch

Texas Instruments TMAG5230 Product Info

1 April 2026 3

Parameters

Type

Omnipolar switch, Unipolar switch

Supply current (µA)

0.8, 1.4, 1.9, 1.9

Bandwidth (kHz)

0.02

Supply voltage (min) (V)

1.65

Supply voltage (max) (V)

5.5

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Output

Open-drain, Push-Pull output driver

Package

DSBGA (YBH)-4-0.64 mm² 0.8 x 0.8

Features

  • Supply voltage range: 1.65V to 5.5V
  • Ambient temperature range: –40°C to 125°C
  • Magnetic pole detection options:
    • Omnipolar
    • Dual-unipolar
  • Output type:
    • Push-pull
    • Open-drain
  • Active output state (when B > BOP): low (VOL)
  • Magnetic operate points(BOP):
    • 2.4mT to 24mT
  • Low average current consumption of 1.6µA
  • Sampling rates:
    • 1.25Hz to 2.5kHz
  • Industry standard 4-pin DSBGA package
  • Supply voltage range: 1.65V to 5.5V
  • Ambient temperature range: –40°C to 125°C
  • Magnetic pole detection options:
    • Omnipolar
    • Dual-unipolar
  • Output type:
    • Push-pull
    • Open-drain
  • Active output state (when B > BOP): low (VOL)
  • Magnetic operate points(BOP):
    • 2.4mT to 24mT
  • Low average current consumption of 1.6µA
  • Sampling rates:
    • 1.25Hz to 2.5kHz
  • Industry standard 4-pin DSBGA package

Description

The TMAG5230 is a Hall-effect switch used in magnetic position sensing applications. The TMAG5230 product family is available in an ultra small form factor DSBGA(WCSP) package that supports both omnipolar and unipolar outputs. The device supports multiple combinations of high sensitivity thresholds with various sampling rates that allow flexible system design for magnet selection, sensitivity, and power requirements.

The device output type is available as a push-pull output to eliminate the need for an external pullup resistor, or as an open-drain output which allows the use of a IO voltage that is different than the TMAG5230 supply. The open-drain output can support voltages greater than VCC, eliminating the need for power-sequencing.

Subscribe to Welllinkchips !
Your Name
* Email
Popular Posts
Featured Parts More >
Submit a request
CONTACT US
Company address

WELL LINK CHIPS GROUP CO.,LIMITED FLAT/RM 1802 BEVERLY HOUSE 93-107 LOCKHART ROAD WANCHAI HK

Send Enquiry
SEND e-MAIL
Office hour from 9am to 6pm ,
Monday through Friday, UTC/GMT +8