0
THS4541
  • THS4541
  • THS4541
  • THS4541
  • THS4541
  • THS4541

THS4541

ACTIVE

High-Speed Differential I/O Amplifier

Texas Instruments THS4541 Product Info

1 April 2026 10

Parameters

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.4

BW at Acl (MHz)

620

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

1500

Architecture

Bipolar, Fully Differential ADC Driver

Vn at flatband (typ) (nV√Hz)

2.2

Iq per channel (typ) (mA)

10.1

Rail-to-rail

In to V-, Out

Vos (offset voltage at 25°C) (max) (mV)

0.45

Operating temperature range (°C)

-40 to 125

Iout (typ) (mA)

100

2nd harmonic (dBc)

140

3rd harmonic (dBc)

140

Frequency of harmonic distortion measurement (MHz)

0.1

GBW (typ) (MHz)

850

Input bias current (max) (pA)

13000000

Features

Decompensated, Shutdown

CMRR (typ) (dB)

100

Rating

Catalog

Package

VQFN (RGT)-16-9 mm² 3 x 3

Features

  • Fully differential amplifier (FDA) architecture
  • Bandwidth: 500MHz (G = 2V/V)
  • Gain bandwidth product: 850MHz
  • Slew rate: 1500V/µs
  • HD2: –95dBc at 10MHz (2VPP, RL = 500Ω)
  • HD3: –90dBc at 10MHz (2VPP, RL = 500Ω)
  • Input voltage noise: 2.2nV/√Hz (f > 100kHz)
  • Low offset drift: ±0.5µV/°C (typical)
  • Negative rail input (NRI)
  • Rail-to-rail output (RRO)
  • Robust operation for Rload ≥ 50Ω
  • Output common-mode control
  • Power supply:
    • Single-supply voltage range: 2.7V to 5.4V
    • Split-supply voltage range: ±1.35V to ±2.7V
    • Quiescent current: 10.1mA (5V supply)
  • Power-down capability: 2µA (typical)
  • Fully differential amplifier (FDA) architecture
  • Bandwidth: 500MHz (G = 2V/V)
  • Gain bandwidth product: 850MHz
  • Slew rate: 1500V/µs
  • HD2: –95dBc at 10MHz (2VPP, RL = 500Ω)
  • HD3: –90dBc at 10MHz (2VPP, RL = 500Ω)
  • Input voltage noise: 2.2nV/√Hz (f > 100kHz)
  • Low offset drift: ±0.5µV/°C (typical)
  • Negative rail input (NRI)
  • Rail-to-rail output (RRO)
  • Robust operation for Rload ≥ 50Ω
  • Output common-mode control
  • Power supply:
    • Single-supply voltage range: 2.7V to 5.4V
    • Split-supply voltage range: ±1.35V to ±2.7V
    • Quiescent current: 10.1mA (5V supply)
  • Power-down capability: 2µA (typical)

Description

The THS4541 is a low-power, voltage-feedback, fully differential amplifier (FDA) with an input common-mode range below the negative rail, and rail-to-rail output. The THS4541 is designed for low-power data acquisition systems where high density is critical in a high-performance analog-to-digital converter (ADC) or digital-to-analog converter (DAC) interface design.

The THS4541 features the negative-rail input required when interfacing a dc-coupled, ground-centered, source signal. This negative-rail input, with rail-to-rail output, allows for easy interface between single-ended, ground-referenced, bipolar signal sources and a wide variety of successive approximation register (SAR), delta-sigma (ΔΣ), or pipeline ADCs using only a single 2.7V to 5.4V power supply.

The THS4541 is characterized for operation over the wide temperature range of –40°C to +125°C and is available in 16-pin VQFN and 10-pin WQFN packages.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request