0
THS4536
  • THS4536
  • THS4536

THS4536

ACTIVE

Ultra-High Precision CMOS NRI/RRO Fully Differential Amplifier

Texas Instruments THS4536 Product Info

1 April 2026 6

Parameters

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.5

BW at Acl (MHz)

67

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

57

Architecture

Fully Differential, Fully Differential ADC Driver

Vn at flatband (typ) (nV√Hz)

4.3

Iq per channel (typ) (mA)

4.7

Rail-to-rail

In to V-, Out

Vos (offset voltage at 25°C) (max) (mV)

0.05

Operating temperature range (°C)

-40 to 125

Iout (typ) (mA)

60

2nd harmonic (dBc)

120

3rd harmonic (dBc)

114

Frequency of harmonic distortion measurement (MHz)

0.01

GBW (typ) (MHz)

80

Input bias current (max) (pA)

200

Features

Shutdown

CMRR (typ) (dB)

140

Rating

Catalog

Package

WQFN (RUN)-10-4 mm² 2 x 2

Features

  • Bandwidth: 65MHz (G = 1V/V)
  • Gain bandwidth product: 80MHz
  • THS453x Device Comparison:
    • THS4535 offset voltage: 2mV (max)
    • THS4535 offset drift: 1.4µV/°C (max)
    • THS4536 offset voltage: 20µV (max)
    • THS4536 offset drift: 0.8µV/°C (max)
  • Supply operating range: 2.7V to 5.5V
  • Low harmonic distortion:
    • HD2: 125dBc at 2VPP, 10kHz
    • HD3: 114dBc at 2VPP, 10kHz
  • Slew rate: 47V/µs & 57V/µs (Rising & Falling)
  • Low noise:
    • Voltage Noise: 4.3nV/√Hz (2.5kHz 1/f corner)
    • Current Noise: 70fA/√Hz
  • Low Bias & Offset Current: ±40pA at 125C (max)
  • Supply current: 4.7mA
  • Negative rail input (NRI)
  • Rail-to-rail output (RRO):
    • THS4535: 100mV from rails (typical)
    • THS4536: 80mV from rails (max)
  • Temperature range: −40°C to +125°C
  • Bandwidth: 65MHz (G = 1V/V)
  • Gain bandwidth product: 80MHz
  • THS453x Device Comparison:
    • THS4535 offset voltage: 2mV (max)
    • THS4535 offset drift: 1.4µV/°C (max)
    • THS4536 offset voltage: 20µV (max)
    • THS4536 offset drift: 0.8µV/°C (max)
  • Supply operating range: 2.7V to 5.5V
  • Low harmonic distortion:
    • HD2: 125dBc at 2VPP, 10kHz
    • HD3: 114dBc at 2VPP, 10kHz
  • Slew rate: 47V/µs & 57V/µs (Rising & Falling)
  • Low noise:
    • Voltage Noise: 4.3nV/√Hz (2.5kHz 1/f corner)
    • Current Noise: 70fA/√Hz
  • Low Bias & Offset Current: ±40pA at 125C (max)
  • Supply current: 4.7mA
  • Negative rail input (NRI)
  • Rail-to-rail output (RRO):
    • THS4535: 100mV from rails (typical)
    • THS4536: 80mV from rails (max)
  • Temperature range: −40°C to +125°C

Description

The THS4536 is a 60MHz fully differential amplifier (FDA) that is specifically designed to drive fully differential analog-to-digital converters (ADCs) up to 2MSPS. The THS453x family offers two options: THS4535 (untrimmed) & THS4536 (trimmed).

The THS4535 is an excellent choice for simple single-to-dual conversions. FDAs such as the THS4535 offer performance benefits over traditional dual op amps, including bandwidth and phase balance between outputs and a VOCM pin to easily adjust the output common-mode voltage. For higher dc precision applications, such as high-speed low-side current shunt measurements, the THS4536 provides package level trim for offset and offset drift. THS453x devices also provide higher transient current output drive to meet the needs of successive approximation register (SAR) ADC charge injection and delta-sigma (ΔΣ) ADC precharge buffers.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request