0
TAC5311-Q1
  • TAC5311-Q1
  • TAC5311-Q1
  • TAC5311-Q1

TAC5311-Q1

ACTIVE

Automotive mono audio codec with 104dB ADC, 114dB DAC, high-voltage input, mic bias & diagnostics

Texas Instruments TAC5311-Q1 Product Info

1 April 2026 6

Parameters

Number of ADC channels

1

Number of DAC channels

1

Digital audio interface

I2S, LJ, TDM

Control interface

I2C, SPI

Analog inputs

1

Analog outputs

1

Features

Digital mic support, Fault Diagnostic, Headset detect, Low latency, Low power, Mic bias, Phase-locked loop (PLL), Single supply, Stereo headphone amplifier, Thermal Foldback

Sampling rate (max) (kHz)

768

Rating

Automotive

ADC SNR (typ) (dB)

104

DAC SNR (typ) (dB)

114

Operating temperature range (°C)

-40 to 125

Package

WQFN (RTV)-32-25 mm² 5 x 5

Features

  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • Mono audio ADC channel
    • Performance:
      • Line/Microphone differential input dynamic range: 104dB
      • Differential input THD+N: –95dB
      • Channel summing mode supports high SNR: 107dB
    • Input voltage:
      • Differential, 10VRMS full-scale inputs
      • Single-ended, 5VRMS full-scale inputs
    • ADC sample rate (fS) = 4kHz to 768kHz
    • Programmable microphone bias (3V to 10V):
      • With an integrated efficient boost converter, or
      • With external high voltage HVDD supply
    • Programmable microphone input fault diagnostics:
      • Open inputs or shorted inputs
      • Short to ground, MICBIAS or VBAT
      • MICBIAS over current protection
  • Mono audio DAC channel
    • Performance:
      • DAC to differential line-out DR: 114dB
      • DAC to single-ended headphone-out DR: 108dB
      • THD+N: –96dB
    • Headphone/Line-out output voltage:
      • Differential, 2VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rate (fs) = 4kHz to 768kHz
  • Common Features
    • Low-latency & Ultra low-latency decimation/interpolation filter options
    • Programmable HPF and Biquad filters
    • I2C or SPI control interface
    • Audio Serial Interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word Length: 16, 20, 24 or 32 Bits
    • Programmable PLL for flexible clocking
    • Low Power Modes
    • Single supply operation AVDD: 3.3V
    • I/O supply operation: 1.2V, 1.8V or 3.3V
  • AEC-Q100 qualified for automotive applications
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • Mono audio ADC channel
    • Performance:
      • Line/Microphone differential input dynamic range: 104dB
      • Differential input THD+N: –95dB
      • Channel summing mode supports high SNR: 107dB
    • Input voltage:
      • Differential, 10VRMS full-scale inputs
      • Single-ended, 5VRMS full-scale inputs
    • ADC sample rate (fS) = 4kHz to 768kHz
    • Programmable microphone bias (3V to 10V):
      • With an integrated efficient boost converter, or
      • With external high voltage HVDD supply
    • Programmable microphone input fault diagnostics:
      • Open inputs or shorted inputs
      • Short to ground, MICBIAS or VBAT
      • MICBIAS over current protection
  • Mono audio DAC channel
    • Performance:
      • DAC to differential line-out DR: 114dB
      • DAC to single-ended headphone-out DR: 108dB
      • THD+N: –96dB
    • Headphone/Line-out output voltage:
      • Differential, 2VRMS full-scale
      • Single-ended, 1VRMS full-scale
    • DAC sample rate (fs) = 4kHz to 768kHz
  • Common Features
    • Low-latency & Ultra low-latency decimation/interpolation filter options
    • Programmable HPF and Biquad filters
    • I2C or SPI control interface
    • Audio Serial Interface
      • Format: TDM, I2S or Left-justified (LJ)
      • Word Length: 16, 20, 24 or 32 Bits
    • Programmable PLL for flexible clocking
    • Low Power Modes
    • Single supply operation AVDD: 3.3V
    • I/O supply operation: 1.2V, 1.8V or 3.3V

Description

The TAC5311-Q1 is a low-power mono codec with 10VRMS differential input, 104dB ADC and 2VRMS differential output, 114dB DAC. The TAC5311-Q1 supports both differential and single-ended inputs and outputs. The device supports both microphone and line inputs on ADC channel with options for AC and DC coupling configurations. The DAC output can be configured for either line-out or headphone loads. TAC5311-Q1 can drive up to 62.5mW into a 16Ω headphone load. The device also offers an integrated high-voltage, programmable microphone bias, and input diagnostic circuitry that allows direct connection to microphone-based automotive systems with full fault diagnostic capability for direct-coupled inputs. The TAC5311-Q1 integrates an efficient boost converter to generate a high-voltage microphone bias using an external, low-voltage, 3.3V supply. The device can also directly use an external high-voltage supply (HVDD), which is any readily available supply in the system to generate this microphone bias. The TAC5311-Q1 integrates a programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, interpolation and decimation filters with low and ultra-low latency filter modes. It allows for sample rates up to 768kHz. The TAC5311-Q1 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single, 3.3V supply operation, makes TAC5311-Q1 an excellent choice for space-constrained automotive systems.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request