0
TAC5142
  • TAC5142
  • TAC5142
  • TAC5142

TAC5142

ACTIVE

Hardware-control stereo audio codec with 103dB dynamic range ADC and 110dB dynamic range DAC

Texas Instruments TAC5142 Product Info

1 April 2026 4

Parameters

Number of ADC channels

2

Number of DAC channels

2

Digital audio interface

I2S, L, TDM

Control interface

H/W

Analog inputs

2

Analog outputs

2

Features

Low power, Mic bias, Phase-locked loop (PLL), Pin control, Single supply, Stereo headphone amplifier

Sampling rate (max) (kHz)

192

Rating

Catalog

ADC SNR (typ) (dB)

103

DAC SNR (typ) (dB)

110

Operating temperature range (°C)

-40 to 125

Package

VQFN (RGE)-24-16 mm² 4 x 4

Features

  • Stereo audio ADC Channels
    • Performance:
      • Line/Microphone differential input dynamic range: 103dB
      • Differential input THD+N: –91dB
    • Input voltage:
      • Differential, 2VRMS full-scale inputs
      • Single-ended, 1VRMS full-scale inputs
    • ADC sample rates (fS) = 8kHz to 192kHz
    • Digital HPF with configurable cut-off frequency:
      • 1Hz or 12Hz, at 48kHz sampling rate
    • Low noise microphone bias
  • Stereo audio DAC Channels
    • Performance:
      • DAC to differential line-out dynamic range: 110 dB
      • DAC to pseudo-differential headphone-out dynamic range: 107 dB
      • THD+N: –100 dB
    • Output voltage:
      • Differential line-out/receiver, 2VRMS full-scale
      • Pseudo-differential headphone, 1VRMS full-scale
      • Single-ended line-out, 1VRMS full-scale
    • DAC sample rates (fs) = 8kHz to 192kHz
  • Common Features
    • Pin or Hardware Control
    • Audio Serial Interface
      • Format: TDM, I2S, or Left-justified (LJ)
      • Bus Controller and Target Modes
      • Configurable TDM Slots
      • Word Length: Selectable 24 or 32 Bits
    • Pin-selectable digital decimation/interpolation filter options:
      • Linear-phase or Low-latency
    • Integrated PLL
    • Auto clock & sample rate detection
    • Interrupt output on clock error
    • Single Supply Operation AVDD: 1.8V or 3.3V
    • I/O Supply Operation: 1.8V or 3.3V
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C
  • Stereo audio ADC Channels
    • Performance:
      • Line/Microphone differential input dynamic range: 103dB
      • Differential input THD+N: –91dB
    • Input voltage:
      • Differential, 2VRMS full-scale inputs
      • Single-ended, 1VRMS full-scale inputs
    • ADC sample rates (fS) = 8kHz to 192kHz
    • Digital HPF with configurable cut-off frequency:
      • 1Hz or 12Hz, at 48kHz sampling rate
    • Low noise microphone bias
  • Stereo audio DAC Channels
    • Performance:
      • DAC to differential line-out dynamic range: 110 dB
      • DAC to pseudo-differential headphone-out dynamic range: 107 dB
      • THD+N: –100 dB
    • Output voltage:
      • Differential line-out/receiver, 2VRMS full-scale
      • Pseudo-differential headphone, 1VRMS full-scale
      • Single-ended line-out, 1VRMS full-scale
    • DAC sample rates (fs) = 8kHz to 192kHz
  • Common Features
    • Pin or Hardware Control
    • Audio Serial Interface
      • Format: TDM, I2S, or Left-justified (LJ)
      • Bus Controller and Target Modes
      • Configurable TDM Slots
      • Word Length: Selectable 24 or 32 Bits
    • Pin-selectable digital decimation/interpolation filter options:
      • Linear-phase or Low-latency
    • Integrated PLL
    • Auto clock & sample rate detection
    • Interrupt output on clock error
    • Single Supply Operation AVDD: 1.8V or 3.3V
    • I/O Supply Operation: 1.8V or 3.3V
    • Temperature grade 1: –40°C ≤ TA ≤ +125°C

Description

The TAC5142 is a stereo audio codec with 2VRMS differential input, 103dB dynamic range ADC and 2VRMS differential output, 110dB dynamic range DAC. The TAC5142 supports both differential and single-ended inputs and outputs. The ADC supports both line/microphone input signals with options for AC or DC coupling configurations and the DAC output can be configured for either line-output or headphone loads. The DAC can drive upto 62.5mW into a 16Ω headphone load. The device integrates a phase-locked loop (PLL) and supports sample rates up to 192kHz for both the ADC and DAC signal chains. The device also integrates a DC-removal digital high-pass filter (HPF) with configurable cut-off for the ADC signal chain. The TAC5142 supports time-division multiplexing (TDM), left-justified (LJ), or I2S audio formats in controller and target modes, and is pin or hardware controlled. These integrated high-performance features, pin control along with a single supply operation, make TAC5142 an excellent choice for space-constrained audio applications.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request