0
SN74CBTLV3126
  • SN74CBTLV3126
  • SN74CBTLV3126
  • SN74CBTLV3126
  • SN74CBTLV3126
  • SN74CBTLV3126
  • SN74CBTLV3126
  • SN74CBTLV3126
  • SN74CBTLV3126

SN74CBTLV3126

ACTIVE

3.3-V, 1:1 (SPST), 4-channel FET bus switch

Texas Instruments SN74CBTLV3126 Product Info

1 April 2026 6

Parameters

Protocols

Analog, I2C, I2S, JTAG, RGMII, SPI, TDM, UART

Configuration

1:1 SPST

Number of channels

4

Bandwidth (MHz)

200

Supply voltage (max) (V)

3.6

Ron (typ) (mΩ)

5000

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

3.6

Operating temperature range (°C)

-40 to 85

Input/output continuous current (max) (mA)

128

COFF (typ) (pF)

7

CON (typ) (pF)

2.5

OFF-state leakage current (max) (µA)

1

Ron (max) (mΩ)

40000

VIH (min) (V)

2

VIL (max) (V)

0.8

Rating

Catalog

Package

SOIC (D)-14-51.9 mm² 8.65 x 6

Features

  • Standard 126-type pinout
  • 5Ω switch connection between two ports
  • Rail-to-rail switching on data I/O ports
  • Ioff supports partial-power-down mode operation
  • Latch-up performance exceeds 100mA per JESD 78, Class II
  • Standard 126-type pinout
  • 5Ω switch connection between two ports
  • Rail-to-rail switching on data I/O ports
  • Ioff supports partial-power-down mode operation
  • Latch-up performance exceeds 100mA per JESD 78, Class II

Description

The SN74CBTLV3126 quadruple FET bus switch features independent line switches. Each switch is disabled when the associated output-enable (OE) input is low.

This device is fully specified for partial-power-down applications using Ioff. The Ioff feature verifies that damaging current does not backflow through the device when powered down. The SN74CBTLV3126 device has isolation during power off.

To verify the high-impedance state during power up or power down, tie OE to GND through a pull down resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request