0
SN74CBTH16211
  • SN74CBTH16211
  • SN74CBTH16211

SN74CBTH16211

ACTIVE

5-V, 1:1 (SPST), 24-channel FET bus switch with bus hold

Texas Instruments SN74CBTH16211 Product Info

1 April 2026 3

Parameters

Protocols

Analog

Configuration

1:1 SPST

Number of channels

24

Bandwidth (MHz)

200

Supply voltage (max) (V)

5.5

Ron (typ) (mΩ)

5000

Input/output voltage (min) (V)

0

Input/output voltage (max) (V)

5.5

Operating temperature range (°C)

-40 to 85

Input/output continuous current (max) (mA)

128

Ron (max) (mΩ)

20000

VIH (min) (V)

2

VIL (max) (V)

0.8

Rating

Catalog

Package

TSSOP (DGG)-56-113.4 mm² 14 x 8.1

Features

  • 5- Switch Connection Between Two Ports
  • TTL-Compatible Input Levels
  • Bus Hold on Data Inputs/Outputs Eliminates the Need for External Pullup/Pulldown Resistors

  • 5- Switch Connection Between Two Ports
  • TTL-Compatible Input Levels
  • Bus Hold on Data Inputs/Outputs Eliminates the Need for External Pullup/Pulldown Resistors

Description

The SN74CBTH16211 provides 24 bits of high-speed TTL-compatible bus switching. The low on-state resistance of the switch allows connections to be made with minimal propagation delay.

The device is organized as dual 12-bit bus switches with separate output-enable (OE) inputs. It can be used as two 12-bit bus switches or one 24-bit bus switch. When OE is low, the associated 12-bit bus switch is on, and the A port is connected to the B port. When OE is high, the switch is open, and a high-impedance state exists between the two ports.

Active bus-hold circuitry is provided to hold unused or floating A and B ports at a valid logic level.

To ensure the high-impedance state during power up or power down, OE should be tied to V CC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.