0
RES31A
  • RES31A
  • RES31A
  • RES31A
  • RES31A

RES31A

ACTIVE

Low power matched thin-film resistor divider network with 100kΩ fixed input

Texas Instruments RES31A Product Info

1 April 2026 7

Parameters

Rating

Catalog

Number of dividers

2

Divider ratio

1:1, 1:2, 1:2.5, 1:3, 1:4, 1:5

Input resistance (kΩ)

100

Gain resistance (kΩ)

100, 200, 250, 300, 400, 500

Initial ratio tolerance (typ) (ppm)

±120

Initial ratio tolerance (max) (ppm)

±500

Total Divider Voltage (max) (V)

85

Matching Tolerance (max) (ppm)

-1000

Matching Tolerance (typ) (ppm)

-85

Operating temperature range (°C)

-40 to 125

Package

SOT-23-THN (DDF)-8-8.12 mm² 2.9 x 2.8

Features

  • Wide temperature range: –40°C to +125°C
  • Ratio = RIN : RG, RIN = 100kΩ (nominal)
  • Highly precise ratio tolerance: ±0.05% (maximum)
  • Low drift over temperature range:
    • +2/–5ppm/°C max TCRratio for RES31A00 (±2ppm/°C max TCRratio from –40°C to +105°C)
    • ±2ppm/°C max TCRratio for other ratios
  • Wide temperature range: –40°C to +125°C
  • Ratio = RIN : RG, RIN = 100kΩ (nominal)
  • Highly precise ratio tolerance: ±0.05% (maximum)
  • Low drift over temperature range:
    • +2/–5ppm/°C max TCRratio for RES31A00 (±2ppm/°C max TCRratio from –40°C to +105°C)
    • ±2ppm/°C max TCRratio for other ratios

Description

The RES31A is a matched pair of resistive dividers, implemented in thin-film SiCr with Texas Instruments’ modern, high-performance, analog CMOS process. The device has a nominal input resistance of 100kΩ, supporting higher divider voltages than the RES11A but with a lower current draw than the RES21A, and is available in several nominal ratios to meet a wide array of system needs. Use the RES31A in an inverse gain configuration by simply rotating the device placement by 180°. This feature supports layout reuse and increases flexibility for applications such as discrete instrumentation or difference amplifier implementations.

The RES31A series features high ratio-matching precision, with the measured ratio of each divider within 0.05% (±500ppm) (typical) of the nominal. This precision is maintained over the temperature range.

The RES31A is specified with a temperature range from –40°C to +125°C. The device is offered in an 8‑pin, SOT‑23-THIN package, with a body size of 2.9mm × 1.6mm (body size is a nominal value and does not include pins).

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request