0
OPA830-EP
  • OPA830-EP
  • OPA830-EP

OPA830-EP

ACTIVE

Low-Power, Single-Supply, Wideband Operational Amplifier

Texas Instruments OPA830-EP Product Info

1 April 2026 4

Parameters

Architecture

Voltage FB

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.8

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

11

GBW (typ) (MHz)

110

BW at Acl (MHz)

310

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

600

Vn at flatband (typ) (nV√Hz)

9.2

Vn at 1 kHz (typ) (nV√Hz)

9.5

Iq per channel (typ) (mA)

4.25

Vos (offset voltage at 25°C) (max) (mV)

8.6

Rail-to-rail

In to V-, Out

Rating

HiRel Enhanced Product

Operating temperature range (°C)

-40 to 105

CMRR (typ) (dB)

80

Input bias current (max) (pA)

10000000

Offset drift (typ) (µV/°C)

25

Iout (typ) (mA)

85

2nd harmonic (dBc)

67

3rd harmonic (dBc)

60

Frequency of harmonic distortion measurement (MHz)

5

Package

SOT-23 (DBV)-5-8.12 mm² 2.9 x 2.8

Features

  • High Bandwidth:
    • 250MHz (G = +1)
    • 110MHz (G = +2)
  • Low Supply Current:
    • 3.9mA (VS = +5V)
  • Flexible Supply Range:
    • ±1.4V to ±5.5V Dual Supply
    • +2.8V to +11V Single Supply
  • Input Range Includes Ground On Single Supply
  • 4.88V Output Swing on +5V Supply
  • High Slew Rate: 550V/µs
  • Low Input Voltage Noise: 9.2nV/√Hz
  • Pb-Free SOT23 Package
  • High Bandwidth:
    • 250MHz (G = +1)
    • 110MHz (G = +2)
  • Low Supply Current:
    • 3.9mA (VS = +5V)
  • Flexible Supply Range:
    • ±1.4V to ±5.5V Dual Supply
    • +2.8V to +11V Single Supply
  • Input Range Includes Ground On Single Supply
  • 4.88V Output Swing on +5V Supply
  • High Slew Rate: 550V/µs
  • Low Input Voltage Noise: 9.2nV/√Hz
  • Pb-Free SOT23 Package

Description

The OPA830 is a low-power, single-supply, wideband, voltage-feedback amplifier designed to operate on a single +5V supply. Operation on ±5V or +10V supplies is also supported. The input range extends below the negative supply and to within 1.7V of the positive supply. Using complementary common-emitter outputs provides an output swing to within 25mV of either supply while driving 150Ω. High output drive current (±80mA) and low differential gain and phase errors also make them ideal for single-supply consumer video products.

Low distortion operation is ensured by the high gain bandwidth product (110MHz) and slew rate (550V/µs), making the OPA830 an ideal input buffer stage to 3V and 5V CMOS ADCs. Unlike other low-power, single-supply amplifiers, distortion performance improves as the signal swing is decreased. A low 9.2nV/√Hz input voltage noise supports wide dynamic range operation.

The OPA830 is available in an ultra-small SOT23-5 package.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request