0
OPA698
  • OPA698
  • OPA698

OPA698

ACTIVE

Unity Gain Stable, Wideband Voltage Limiting Amplifier

Texas Instruments OPA698 Product Info

1 April 2026 3

Parameters

Architecture

Voltage FB

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

5

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

12

GBW (typ) (MHz)

300

BW at Acl (MHz)

650

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

1800

Vn at flatband (typ) (nV√Hz)

4

Vn at 1 kHz (typ) (nV√Hz)

5.9

Iq per channel (typ) (mA)

15.5

Vos (offset voltage at 25°C) (max) (mV)

5

Rail-to-rail

No

Features

Integrated Clamps

Rating

Catalog

Operating temperature range (°C)

-40 to 85

CMRR (typ) (dB)

61

Input bias current (max) (pA)

10000000

Offset drift (typ) (µV/°C)

15

Iout (typ) (mA)

190

2nd harmonic (dBc)

74

3rd harmonic (dBc)

87

Frequency of harmonic distortion measurement (MHz)

5

Package

SOIC (D)-8-29.4 mm² 4.9 x 6

Features

  • High linearity near limiting
  • Fast recovery from overdrive: 1ns
  • Limiting voltage accuracy: ±5mV
  • –3db bandwidth (g = +1): 650MHz
  • Gain bandwidth product: 300MHz
  • Slew rate: 1800V/µs
  • ±5V and +5V supply operation
  • High-gain version available: OPA699
  • High linearity near limiting
  • Fast recovery from overdrive: 1ns
  • Limiting voltage accuracy: ±5mV
  • –3db bandwidth (g = +1): 650MHz
  • Gain bandwidth product: 300MHz
  • Slew rate: 1800V/µs
  • ±5V and +5V supply operation
  • High-gain version available: OPA699

Description

The OPA698 is a wide-band, unity-gain stable voltage-feedback op amp that offers bipolar output voltage limiting. Two buffered limiting voltages take control of the output when attempting to drive beyond these limits. This new output limiting architecture holds the limiter offset error to ±5mV.

The op amp operates linearly to within 20mV of the output limit voltages. The combination of a narrow nonlinear range and the low limiting offset allows the limiting voltages to be set within 100mV of the desired linear output range. A fast 1ns recovery from limiting provides overdrive signals that are transparent to the signal channel. Implementing the limiting function at the output, as opposed to the input, gives the specified limiting accuracy for any gain, and allows the OPA698 to be used in all standard op-amp applications.

Nonlinear analog signal processing benefits from the ability of the OPA698 to sharply transition from linear operation to output limiting. The quick recovery time supports high-speed applications.

The OPA698 is available in an industry-standard pin-out SOIC-8 package. For higher gain, or transimpedance applications that require output limiting with fast recovery, consider the OPA699.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request