- Low-Power, High-Performance CMOS Technology
- 0.13-µm Technology
- 192-MHz Maximum Frequency
- 1.6 ± 5% V Core Voltage
- ARM926EJ-S™ (MPU) Core
- Support for 32-Bit and 16-Bit (Thumb® Mode) Instruction Sets
- 16K-Byte Instruction Cache
- 8K-Byte Data Cache
- Data and Program Memory Management Unit (MMU)
- 17-Word Write Buffer
- Two 64-Entry Translation Look-Aside Buffers (TLBs) for MMUs
- TMS320C55x™ (C55x™) DSP Core
- One/Two Instructions Executed per Cycle
- Dual Multipliers (Two Multiply-Accumulates per Cycle)
- Two Arithmetic/Logic Units
- Five Internal Data/Operand Buses (3 Read Buses and 2 Write Buses)
- 32K x 16-Bit On-Chip Dual-Access RAM (DARAM) (64K Bytes)
- 48K x 16-Bit On-Chip Single-Access RAM (SARAM) (96K Bytes)
- Instruction Cache (24K Bytes)
- Video Hardware Accelerators for DCT, iDCT, Pixel Interpolation, and Motion Estimation for Video Compression
- 250K Bytes of Shared Internal SRAM
- Memory Traffic Controller (TC)
- 16-Bit EMIFS Supports up to 256M Bytes of External Memory (i.e., Async. ROM/RAM, NOR/NAND Flash, and Sync. Burst Flash)
- 16-Bit EMIFF to Access up to 64M Bytes of SDRAM, Mobile SDRAM, or Mobile DDR
- DSP Memory Management Unit
- DSP Peripherals
- Three 32-Bit Timers and Watchdog Timer
- Six-Channel DMA Controller
- Two Multichannel Buffered Serial Ports
- Two Multichannel Serial Interfaces
- MPU Peripherals
- Three 32-Bit Timers and Watchdog Timer
- USB 1.1 Host and Client Controllers
- USB On-the-Go (OTG) Controller
- 3 USB Ports, One With an Integrated Transceiver
- Camera Interface for Parallel CMOS Sensors
- Real-Time Clock (RTC)
- Pulse-Width Tone (PWT) Interface
- Pulse-Width Light (PWL) Interface
- Keyboard Matrix Interface (6 x 5 or 8 x 8)
- HDQ/1-Wire® Interface
- Multimedia Card (MMC) and Secure Digital (SD) Interface
- Up to 16 MPU General-Purpose I/Os
- Two LED Pulse Generators (LPGs)
- ETM9™ Trace Module for ARM926EJ-S Debug
- 16-/18-Bit LCD Controller With Dedicated System DMA Channel
- 32-kHz Operating System (OS) Timer
- Shared Peripherals
- 8 General-Purpose Timers
- Serial Port Interface (SPI)
- Three Universal Asynchronous Receiver/Transmitters (UARTs) (Two Supporting SIR mode for IrDA)
- Inter-Integrated Circuit (I2C) Master and Slave Interface
- Multimedia Card (MMC) and Secure Digital (SD) Interface
- Multichannel Buffered Serial Port
- Up to 64 Shared General-Purpose I/Os
- 32-kHz Synchro Counter
- Endian Conversion Unit
- Hardware Accelerators for Cryptographic Functions
- Random Number Generation
- DES and 3DES
- SHA-1 and MD5
- Individual Power-Saving Modes for MPU/DSP/TC
- On-Chip Scan-Based Emulation Logic
- IEEE Std 1149.1
(JTAG) Boundary Scan Logic - Three 289-Ball BGA (Ball Grid Array) Packages (ZDY and ZZG - Lead-Free; GDY - With Lead)
- The OMAP5912 device is targeted at the following applications:
- Applications Processing Devices
- Mobile Communications
- WAN 802.11X
- Bluetooth™
- GSM, GPRS, EDGE
- CDMA
- Video and Image Processing (MPEG4, JPEG, Windows® Media Video, etc.)
- Advanced Speech Applications (text-to-speech, speech recognition)
- Audio Processing (MPEG-1 Audio Layer3 [MP3], AMR, WMA, AAC, and Other GSM Speech Codecs)
- Graphics and Video Acceleration
- Generalized Web Access
- Data Processing
IEEE Standard 1149.1-1990 Standard Test-Access Port and Boundary Scan Architecture.
TMS320C55x, C55x, OMAP, and DSP/BIOS are trademarks of Texas Instruments.
ARM926EJ-S and ETM9 are trademarks of ARM Limited in the EU and other countries.
Thumb and ARM are registered trademarks of ARM Limited in the EU and other countries.
1-Wire is a registered trademark of Dallas Semiconductor Corporation.
Bluetooth is a trademark owned by Bluetooth SIG, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.
- Low-Power, High-Performance CMOS Technology
- 0.13-µm Technology
- 192-MHz Maximum Frequency
- 1.6 ± 5% V Core Voltage
- ARM926EJ-S™ (MPU) Core
- Support for 32-Bit and 16-Bit (Thumb® Mode) Instruction Sets
- 16K-Byte Instruction Cache
- 8K-Byte Data Cache
- Data and Program Memory Management Unit (MMU)
- 17-Word Write Buffer
- Two 64-Entry Translation Look-Aside Buffers (TLBs) for MMUs
- TMS320C55x™ (C55x™) DSP Core
- One/Two Instructions Executed per Cycle
- Dual Multipliers (Two Multiply-Accumulates per Cycle)
- Two Arithmetic/Logic Units
- Five Internal Data/Operand Buses (3 Read Buses and 2 Write Buses)
- 32K x 16-Bit On-Chip Dual-Access RAM (DARAM) (64K Bytes)
- 48K x 16-Bit On-Chip Single-Access RAM (SARAM) (96K Bytes)
- Instruction Cache (24K Bytes)
- Video Hardware Accelerators for DCT, iDCT, Pixel Interpolation, and Motion Estimation for Video Compression
- 250K Bytes of Shared Internal SRAM
- Memory Traffic Controller (TC)
- 16-Bit EMIFS Supports up to 256M Bytes of External Memory (i.e., Async. ROM/RAM, NOR/NAND Flash, and Sync. Burst Flash)
- 16-Bit EMIFF to Access up to 64M Bytes of SDRAM, Mobile SDRAM, or Mobile DDR
- DSP Memory Management Unit
- DSP Peripherals
- Three 32-Bit Timers and Watchdog Timer
- Six-Channel DMA Controller
- Two Multichannel Buffered Serial Ports
- Two Multichannel Serial Interfaces
- MPU Peripherals
- Three 32-Bit Timers and Watchdog Timer
- USB 1.1 Host and Client Controllers
- USB On-the-Go (OTG) Controller
- 3 USB Ports, One With an Integrated Transceiver
- Camera Interface for Parallel CMOS Sensors
- Real-Time Clock (RTC)
- Pulse-Width Tone (PWT) Interface
- Pulse-Width Light (PWL) Interface
- Keyboard Matrix Interface (6 x 5 or 8 x 8)
- HDQ/1-Wire® Interface
- Multimedia Card (MMC) and Secure Digital (SD) Interface
- Up to 16 MPU General-Purpose I/Os
- Two LED Pulse Generators (LPGs)
- ETM9™ Trace Module for ARM926EJ-S Debug
- 16-/18-Bit LCD Controller With Dedicated System DMA Channel
- 32-kHz Operating System (OS) Timer
- Shared Peripherals
- 8 General-Purpose Timers
- Serial Port Interface (SPI)
- Three Universal Asynchronous Receiver/Transmitters (UARTs) (Two Supporting SIR mode for IrDA)
- Inter-Integrated Circuit (I2C) Master and Slave Interface
- Multimedia Card (MMC) and Secure Digital (SD) Interface
- Multichannel Buffered Serial Port
- Up to 64 Shared General-Purpose I/Os
- 32-kHz Synchro Counter
- Endian Conversion Unit
- Hardware Accelerators for Cryptographic Functions
- Random Number Generation
- DES and 3DES
- SHA-1 and MD5
- Individual Power-Saving Modes for MPU/DSP/TC
- On-Chip Scan-Based Emulation Logic
- IEEE Std 1149.1
(JTAG) Boundary Scan Logic - Three 289-Ball BGA (Ball Grid Array) Packages (ZDY and ZZG - Lead-Free; GDY - With Lead)
- The OMAP5912 device is targeted at the following applications:
- Applications Processing Devices
- Mobile Communications
- WAN 802.11X
- Bluetooth™
- GSM, GPRS, EDGE
- CDMA
- Video and Image Processing (MPEG4, JPEG, Windows® Media Video, etc.)
- Advanced Speech Applications (text-to-speech, speech recognition)
- Audio Processing (MPEG-1 Audio Layer3 [MP3], AMR, WMA, AAC, and Other GSM Speech Codecs)
- Graphics and Video Acceleration
- Generalized Web Access
- Data Processing
IEEE Standard 1149.1-1990 Standard Test-Access Port and Boundary Scan Architecture.
TMS320C55x, C55x, OMAP, and DSP/BIOS are trademarks of Texas Instruments.
ARM926EJ-S and ETM9 are trademarks of ARM Limited in the EU and other countries.
Thumb and ARM are registered trademarks of ARM Limited in the EU and other countries.
1-Wire is a registered trademark of Dallas Semiconductor Corporation.
Bluetooth is a trademark owned by Bluetooth SIG, Inc.
Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries.