0
LP8762-Q1
  • LP8762-Q1
  • LP8762-Q1

LP8762-Q1

ACTIVE

Automotive PMIC for SoCs up to ASIL D with four 3A/12A multiphase buck converters

Texas Instruments LP8762-Q1 Product Info

1 April 2026 3

Parameters

Processor supplier

Generic

Processor name

Generic

Regulated outputs (#)

4

Step-down DC/DC converter

4

LDO

0

Vin (min) (V)

2.7

Vin (max) (V)

5.5

Iout (max) (A)

12

Configurability

Factory programmable, Software configurable, User programmable

TI functional safety category

Functional Safety-Compliant

Features

Error signal monitor, I2C, Multiphase, Power good, SPI, SPMI, Thermal monitor, Voltage monitoring, Watchdog

Rating

Automotive

Operating temperature range (°C)

-40 to 125

Package

VQFN-HR (RQK)-32-27.5 mm² 5.5 x 5

Features

  • AEC-Q100 qualified with the following results:
    • Input voltage: 2.8V to 5.5V
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification Level 2
    • Device CDM ESD classification Level C4B
  • Functional safety-compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL-D
    • Documentation available to aid IEC 61508 system design up to SIL-3
    • Systematic capability up to ASIL-D
    • Hardware integrity up to ASIL-D
    • Windowed voltage and over-current monitors
    • Watchdog with selectable trigger / Q&A mode
    • Level or PWM error signal monitoring (ESM)
    • Thermal monitoring with high temperature warning and thermal shutdown
    • Bit-integrity (CRC) error detection on configuration registers and non-volatile memory
  • Four high-efficiency step-down DC/DC converters:
    • Output voltage: 0.3V to 3.34V (0.3V to 1.9V for multi-phase outputs)
    • Maximum output current: 3A per phase, up to 12A with 4-phase configuration
    • Programmable output voltage slew-rate: 0.5mV/µs to 33mV/µs
    • Switching frequency: 2.2MHz or 4.4MHz
  • Ten configurable general purpose I/O (GPIO)
  • SPMI interface for multi-PMIC synchronization
  • Input overvoltage monitor (OVP) and undervoltage lockout (UVLO)

.

.

  • AEC-Q100 qualified with the following results:
    • Input voltage: 2.8V to 5.5V
    • Device temperature grade 1: –40°C to +125°C ambient operating temperature range
    • Device HBM ESD classification Level 2
    • Device CDM ESD classification Level C4B
  • Functional safety-compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL-D
    • Documentation available to aid IEC 61508 system design up to SIL-3
    • Systematic capability up to ASIL-D
    • Hardware integrity up to ASIL-D
    • Windowed voltage and over-current monitors
    • Watchdog with selectable trigger / Q&A mode
    • Level or PWM error signal monitoring (ESM)
    • Thermal monitoring with high temperature warning and thermal shutdown
    • Bit-integrity (CRC) error detection on configuration registers and non-volatile memory
  • Four high-efficiency step-down DC/DC converters:
    • Output voltage: 0.3V to 3.34V (0.3V to 1.9V for multi-phase outputs)
    • Maximum output current: 3A per phase, up to 12A with 4-phase configuration
    • Programmable output voltage slew-rate: 0.5mV/µs to 33mV/µs
    • Switching frequency: 2.2MHz or 4.4MHz
  • Ten configurable general purpose I/O (GPIO)
  • SPMI interface for multi-PMIC synchronization
  • Input overvoltage monitor (OVP) and undervoltage lockout (UVLO)

.

.

Description

The LP8762-Q1 device is designed to meet the power management requirements of the latest processors and platforms in various safety-relevant automotive and industrial applications. The device has four step-down DC/DC converter cores, that are configurable for five different phase configurations from one 4-phase output to four 1-phase outputs. The device settings can be changed by I2C-compatible serial interface or by a SPI serial interface.

The automatic PFM/PWM (AUTO mode) operation together with the automatic phase adding and phase shedding maximizes efficiency over a wide output-current range. The LP8762-Q1 device supports remote differential voltage sensing for multiphase outputs to compensate IR drop between the regulator output and the point-of-load (POL) that improves the accuracy of the output voltage. The switching clock can be forced to PWM mode and the phases are interleaved. The switching can be synchronized to an external clock and spread-spectrum mode can be enabled to minimize the disturbances.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request