0
LP3997
  • LP3997
  • LP3997
  • LP3997
  • LP3997

LP3997

ACTIVE

250-mA, low-dropout voltage regulator with power good & enable

Texas Instruments LP3997 Product Info

1 April 2026 5

Parameters

Rating

Catalog

Vin (max) (V)

6

Vin (min) (V)

2

Iout (max) (A)

0.25

Output options

Fixed Output

Vout (max) (V)

3.3

Vout (min) (V)

3.3

Fixed output options (V)

3.3

Noise (µVrms)

100

PSRR at 100 KHz (dB)

35

Iq (typ) (mA)

0.055

Features

Enable, Power good

Thermal resistance θJA (°C/W)

210

Load capacitance (min) (µF)

1

Regulated outputs (#)

1

Accuracy (%)

3

Dropout voltage (Vdo) (typ) (mV)

140

Operating temperature range (°C)

-40 to 125

Package

VSSOP (DGK)-8-14.7 mm² 3 x 4.9

Features

  • Low 140-mV Dropout at 250-mA Load
  • Stable With Ceramic Capacitor.
  • Low Noise With Bypass Capacitor
  • Less Than 80 µA Typical IQ at 250 mA
  • Virtually Zero IQ (Disabled)
  • Thermal and Short Circuit Protection
  • 3.3-V Output For other voltage options, contact your TI sales office
  • 8-Lead VSSOP Package For other package options, contact your TI sales office.

All trademarks are the property of their respective owners.

  • Low 140-mV Dropout at 250-mA Load
  • Stable With Ceramic Capacitor.
  • Low Noise With Bypass Capacitor
  • Less Than 80 µA Typical IQ at 250 mA
  • Virtually Zero IQ (Disabled)
  • Thermal and Short Circuit Protection
  • 3.3-V Output For other voltage options, contact your TI sales office
  • 8-Lead VSSOP Package For other package options, contact your TI sales office.

All trademarks are the property of their respective owners.

Description

The LP3997 regulator is designed to meet the requirements of portable, battery-powered systems, providing accurate output voltage, low noise, and low quiescent current. The LP3997 provides 3.3V output at up to 250mA load current. The chip architecture is capable of providing output voltages as low as 0.8V. When switched in shutdown mode, the power consumption is virtually zero.

The LP3997 is designed to be stable with space saving ceramic output capacitor as small as 1µF.

The LP3997 also includes an out-of-regulation error flag. When the output is more than 5% below its nominal voltage, the error flag sets to low. If a capacitor is connected to device’s delay pin, a delayed power-on reset signal will be generated.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request