0
LMR66430-EP
  • LMR66430-EP
  • LMR66430-EP
  • LMR66430-EP

LMR66430-EP

ACTIVE

Enhanced-product 36V 3A synchronous step-down converter with 1.5µA IQ and low EMI

Texas Instruments LMR66430-EP Product Info

1 April 2026 4

Parameters

Rating

HiRel Enhanced Product

Topology

Buck

Iout (max) (A)

3

Vin (max) (V)

36

Vin (min) (V)

3

Vout (max) (V)

35

Vout (min) (V)

1

Features

Enable, Fixed Output, Fixed soft start, Forced PWM, Frequency synchronization, Light-load efficiency, Overcurrent protection, Power good, Spread Spectrum, Synchronous rectification, UVLO adjustable, Wettable flanks package

EMI features

Low parasitic Hotrod packaging, Spread Spectrum

Control mode

current mode

Operating temperature range (°C)

-55 to 150

Iq (typ) (A)

0.0000015

Duty cycle (max) (%)

98

TI functional safety category

Functional Safety-Capable

Package

VQFN-FCRLF (RXB)-14-6.76 mm² 2.6 x 2.6

Features

  • Wide input voltage range
    • 3.35V to 36V rising edge
    • 2.7V to 36V falling edge
    • 42V absolute maximum
  • Integrated 132mΩ and 75mΩ MOSFETs
  • Optimized for low EMI requirements:
    • Dual Random Spread Spectrum reduces peak emissions
    • Pin selectable FPWM mode for constant frequency at light loads and FSW synchronization with MODE/SYNC pin
    • Adjustable FSW: 200kHz – 2.2MHz with RT pin
  • Miniature design size and low component cost:
    • 2.6mm × 2.6mm enhanced HotRod™ QFN package with wettable flanks and internal lead free solder
    • Internal control loop compensation
  • Wide input voltage range
    • 3.35V to 36V rising edge
    • 2.7V to 36V falling edge
    • 42V absolute maximum
  • Integrated 132mΩ and 75mΩ MOSFETs
  • Optimized for low EMI requirements:
    • Dual Random Spread Spectrum reduces peak emissions
    • Pin selectable FPWM mode for constant frequency at light loads and FSW synchronization with MODE/SYNC pin
    • Adjustable FSW: 200kHz – 2.2MHz with RT pin
  • Miniature design size and low component cost:
    • 2.6mm × 2.6mm enhanced HotRod™ QFN package with wettable flanks and internal lead free solder
    • Internal control loop compensation

Description

The LMR66430-EP is a small 36V, 3A, synchronous step-down DC/DC converter with an enhanced HotRod QFN package. This easy-to-use converter supports a wide input voltage range of 2.7V to 36V (after start-up or after operating) with transients up to 42V.

The LMR66430-EP is specifically designed to meet low standby power requirements for always-on, applications. Auto mode enables frequency foldback when operating at light loads, allowing high light load efficiency. A seamless transition between pulse width modulation (PWM) and pulse frequency modulation (PFM) modes along with very low MOSFET ON resistances makes sure there is exceptional efficiency across the entire load range. The control architecture (peak current mode) and feature set are an excellent choice for an ultra-small design size with minimal output capacitance. The device minimizes input filter size by using dual-random spread spectrum (DRSS), a low-EMI enhanced HotRod QFN package, and an optimized pinout. The MODE/SYNC and RT pin variants can be used to set or synchronize the frequency to avoid noise sensitive frequency bands. There are NC pins between critical high voltage pins, reducing potential short circuits between pins. The rich feature set of the LMR66430-EP is designed to simplify implementation for a wide range of industrial end equipment.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request