0
LMH5485-SP
  • LMH5485-SP
  • LMH5485-SP

LMH5485-SP

ACTIVE

Radiation-hardness-assured (RHA) 850-MHz fully differential amplifier

Texas Instruments LMH5485-SP Product Info

1 April 2026 4

Parameters

Number of channels

1

Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V)

2.7

Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V)

5.1

BW at Acl (MHz)

530

Acl, min spec gain (V/V)

1

Slew rate (typ) (V/µs)

1400

Architecture

Bipolar, Fully Differential ADC Driver

Vn at flatband (typ) (nV√Hz)

2.4

Iq per channel (typ) (mA)

10.1

Rail-to-rail

In to V-, Out

Vos (offset voltage at 25°C) (max) (mV)

0.45

Operating temperature range (°C)

25 to 25

Iout (typ) (mA)

100

2nd harmonic (dBc)

111

3rd harmonic (dBc)

149

Frequency of harmonic distortion measurement (MHz)

0.1

GBW (typ) (MHz)

850

Input bias current (max) (pA)

150000000

Features

Shutdown

CMRR (typ) (dB)

100

Rating

Space

Package

CFP (HKX)-8-155.4 mm² 6.475 x 24

Features

  • QMLV (QML class V) MIL-PRF-38535 qualified, SMD 5962R1920401VXC
    • TID assured for every wafer lot up to 100krad (Si)
    • Single event latch-up (SEL) immune to LET = 77MeV-cm2/mg
    • Qualified over the military temperature range: –55°C to +125°C
  • Gain bandwidth product (GBWP): 850MHz
  • Slew rate: 1400V/µs
  • HD2, HD3: –111dBc, –149dBc (100kHz, 2VPP)
  • Input voltage noise: 2.4nV/√Hz
  • Low offset drift: ±0.5µV/°C (typical)
  • Negative rail input (NRI), rail-to-rail output (RRO)
  • Power supply:
    • Supply voltage range: 2.7V to 5.4V
    • Quiescent current: 10.1mA
    • Power-down capability: 2µA (typical)
  • QMLV (QML class V) MIL-PRF-38535 qualified, SMD 5962R1920401VXC
    • TID assured for every wafer lot up to 100krad (Si)
    • Single event latch-up (SEL) immune to LET = 77MeV-cm2/mg
    • Qualified over the military temperature range: –55°C to +125°C
  • Gain bandwidth product (GBWP): 850MHz
  • Slew rate: 1400V/µs
  • HD2, HD3: –111dBc, –149dBc (100kHz, 2VPP)
  • Input voltage noise: 2.4nV/√Hz
  • Low offset drift: ±0.5µV/°C (typical)
  • Negative rail input (NRI), rail-to-rail output (RRO)
  • Power supply:
    • Supply voltage range: 2.7V to 5.4V
    • Quiescent current: 10.1mA
    • Power-down capability: 2µA (typical)

Description

The LMH5485-SP is a radiation-hardened assured, low-power, voltage-feedback, fully differential amplifier (FDA). This device is able to achieve a high gain bandwidth product (GBWP) of 850MHz to maintain excellent distortion performance over a wide range of frequencies. This wide bandwidth range is also achieved with a relatively low power consumption of 10.1mA and broadband voltage noise of 2.4nV/√Hz. These features make the LMH5485-SP an excellent choice for power-sensitive data acquisition systems with frequencies > 10MHz that require both the best signal-to-noise ratio (SNR) and spurious-free dynamic range (SFDR).

The LMH5485-SP features the negative-rail input required when interfacing with a dc-coupled, ground-centered source signal. This negative-rail input with a rail-to-rail output allows for easy interface between single-ended, ground-referenced, bipolar signal sources and a wide variety of successive approximation register (SAR), delta-sigma (ΔΣ), or pipeline ADCs using only a single 2.7V to 5.4V power supply. The LMH5485-SP also features a low offset voltage drift of ±0.5µV/°C to maintain excellent dc performance over a wide temperature range of –55°C to +125°C.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request