0
LMG2640
  • LMG2640
  • LMG2640

LMG2640

ACTIVE

650V 105mΩ GaN half-bridge with integrated driver, protection and current sense

Texas Instruments LMG2640 Product Info

1 April 2026 5

Parameters

VDS (max) (V)

650

RDS(on) (mΩ)

105

ID (max) (A)

8.5

Features

Bottom-side cooled, Built-in bootstrap diode, Cycle-by-cycle overcurrent protection, Half-bridge, Overtemperature protection, USB C/PD compatible

Rating

Catalog

Operating temperature range (°C)

-40 to 125

Package

VQFN (RRG)-40-63 mm² 9 x 7

Features

  • 650V GaN power-FET half bridge
  • 105mΩ low-side and high-side GaN FETs
  • Integrated gate drivers with low propagation delays
  • Current-sense emulation with high-bandwidth and high accuracy
  • Low-side / high-side gate-drive interlock
  • High-side gate-drive signal level shifter
  • Smart-switched bootstrap diode function
  • High-side start up : < 8µs
  • Low-side / high-side cycle-by-cycle over-current protection
  • Over-temperature protection with FLT pin reporting
  • AUX idle quiescent current: 250µA
  • AUX standby quiescent current: 50µA
  • BST idle quiescent current: 65µA
  • Maximum supply and input logic pin voltage: 26V
  • 9×7mm QFN package with dual thermal pads
  • 650V GaN power-FET half bridge
  • 105mΩ low-side and high-side GaN FETs
  • Integrated gate drivers with low propagation delays
  • Current-sense emulation with high-bandwidth and high accuracy
  • Low-side / high-side gate-drive interlock
  • High-side gate-drive signal level shifter
  • Smart-switched bootstrap diode function
  • High-side start up : < 8µs
  • Low-side / high-side cycle-by-cycle over-current protection
  • Over-temperature protection with FLT pin reporting
  • AUX idle quiescent current: 250µA
  • AUX standby quiescent current: 50µA
  • BST idle quiescent current: 65µA
  • Maximum supply and input logic pin voltage: 26V
  • 9×7mm QFN package with dual thermal pads

Description

The LMG2640 is a 650V GaN power-FET half bridge intended for switch mode power supply applications. The LMG2640 simplifies design, reduces component count, and reduces board space by integrating half-bridge power FETs, gate drivers, bootstrap diode, and high-side gate-drive level shifter in a 9mm by 7mm QFN package.

The low-side current-sense emulation reduces power dissipation compared to the traditional current-sense resistor and allows the low-side thermal pad to be connected to the cooling PCB power ground.

The high-side gate-drive signal level shifter eliminates noise and burst-mode power dissipation problems found with external solutions. The smart-switched GaN bootstrap FET has no diode forward-voltage drop, avoids overcharging the high-side supply, and has zero reverse-recovery charge.

The LMG2640 supports converter light-load efficiency requirements and burst-mode operation with low quiescent currents and fast start-up times. Protection features include FET turn-on interlock, under-voltage lockout (UVLO), cycle-by-cycle current limit, and over-temperature shut down.

Subscribe to Welllinkchips !
Your Name
* Email
Submit a request